The development of small-scale digital and analog quantum devices raises the question of how to fairly assess and compare the computational power of classical and quantum devices, andof how to detect quantum speedup. Here we show how to define and measure quantum speedup in various scenarios, and how to avoid pitfalls that might mask or fake quantum speedup. We illustrate our discussion with data from a randomized benchmark test on a D-Wave Two device with up to 503 qubits. Comparing the performance of the device on random spin glass instances with limited precision to simulated classical and quantum annealers, we find no evidence of quantum speedup when the entire data set is considered, and obtain inconclusive results when comparing subsets of instances on an instance-by-instance basis. Our results for one particular benchmark do not rule out the possibility of speedup for other classes of problems and illustrate that quantum speedup is elusive and can depend on the question posed.
Quantum information systems require high fidelity quantum operations. It is particularly challenging to convert flying qubits to stationary qubits for deterministic quantum networks,since absorbing naturally shaped emission has a maximum fidelity of only 54%. Theoretical protocols reaching 100% efficiency rely upon sculpting the time dependence of photon wavepackets and receiver coupling. Using these schemes, experimental fidelities have reached up to 20% for optical photons and 81% for microwave photons, although with drive pulses much longer than the cavity decay rate. Here, we demonstrate a particularly simple „time reversed“ photon shape and gated receiver with an absorption fidelity of 99.4% and a receiver efficiency of 97.4% for microwave photons. We classically drive a superconducting coplanar waveguide resonator an order of magnitude shorter than the intrinsic decay time. With the fidelity now at the error threshold for fault tolerant quantum communication (96%) and computation (99.4%) and comparable to fidelities of good logic gates and measurements, new designs may be envisioned for quantum communication and computation systems.
A fundamental challenge for quantum information processing is reducing the impact of environmentally-induced errors. Quantum error detection (QED) provides one approach to handlingsuch errors, in which errors are rejected when they are detected. Here we demonstrate a QED protocol based on the idea of quantum un-collapsing, using this protocol to suppress energy relaxation due to the environment in a three-qubit superconducting circuit. We encode quantum information in a target qubit, and use the other two qubits to detect and reject errors caused by energy relaxation. This protocol improves the storage time of a quantum state by a factor of roughly three, at the cost of a reduced probability of success. This constitutes the first experimental demonstration of an algorithm-based improvement in the lifetime of a quantum state stored in a qubit.
We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the depositionpressure from 2 to 9 mTorr while keeping a nearly stoichiometric composition of Ti(1-x)N(x) (x=0.5), the film resistivity increases, the dominant crystal orientation changes from (100) to (111), grain boundaries become clearer, and the strong compressive strain changes to weak tensile strain. The TiN films absorb a high concentration of contaminants including hydrogen, carbon, and oxygen when they are exposed to air after deposition. With the target-substrate distance set to 88 mm the contaminant levels increase from ~0.1% to ~10% as the pressure is increased from 2 to 9 mTorr. The contaminant concentrations also correlate with in-plane distance from the center of the substrate and increase by roughly two orders of magnitude as the target-substrate distance is increased from 88 mm to 266 mm. These contaminants are found to strongly influence the properties of TiN films. For instance, the resistivity of stoichiometric films increases by around a factor of 5 as the oxygen content increases from 0.1% to 11%. These results suggest that the sputtered TiN particle energy is critical in determining the TiN film properties, and that it is important to control this energy to obtain high-quality TiN films. Superconducting coplanar waveguide resonators made from a series of nearly stoichiometric films grown at pressures from 2 mTorr to 7 mTorr show an increase in intrinsic quality factor from ~10^4 to ~10^6 as the magnitude of the compressive strain decreases from nearly 3800 MPa to approximately 150 MPa and the oxygen content increases from 0.1% to 8%. The films with a higher oxygen content exhibit lower loss, but the nonuniformity of the oxygen incorporation hinders the use of sputtered TiN in larger circuits.
At a time when quantum effects start to pose limits to further miniaturisation of devices and the exponential performance increase due to Moore’s law, quantum technology is maturingto the point where quantum devices, such as quantum communication systems, quantum random number generators and quantum simulators, may be built with powers exceeding the performance of classical computers. A quantum annealer, in particular, finds solutions to hard optimisation problems by evolving a known initial configuration towards the ground state of a Hamiltonian that encodes an optimisation problem. Here, we present results from experiments on a 108 qubit D-Wave One device based on superconducting flux qubits. The correlations between the device and a simulated quantum annealer demonstrate that the device performs quantum annealing: unlike classical thermal annealing it exhibits a bimodal separation of hard and easy problems, with small-gap avoided level crossings characterizing the hard problems. To assess the computational power of the quantum annealer we compare it to optimised classical algorithms. We discuss how quantum speedup could be detected on devices scaled to a larger number of qubits where the limits of classical algorithms are reached.
We demonstrate a planar, tunable superconducting qubit with energy relaxation times up to 44 microseconds. This is achieved by using a geometry designed to both minimize radiative lossand reduce coupling to materials-related defects. At these levels of coherence, we find a fine structure in the qubit energy lifetime as a function of frequency, indicating the presence of a sparse population of incoherent, weakly coupled two-level defects. This is supported by a model analysis as well as experimental variations in the geometry. Our `Xmon‘ qubit combines facile fabrication, straightforward connectivity, fast control, and long coherence, opening a viable route to constructing a chip-based quantum computer.
We analyze single-shot readout for superconducting qubits via controlled catch, dispersion, and release of a microwave field. A tunable coupler is used to decouple the microwave resonatorfrom the transmission line during the dispersive qubit-resonator interaction, thus circumventing damping from the Purcell effect. We show that if the qubit frequency tuning is sufficiently adiabatic, a fast high-fidelity qubit readout is possible even in the strongly nonlinear dispersive regime. Interestingly, the Jaynes-Cummings nonlinearity leads to the quadrature squeezing of the resonator field below the standard quantum limit, resulting in a significant decrease of the measurement error.
. This architecture
consists of superconducting"]qubits capacitively coupled both to individual
memory resonators as well as a common bus. In this work we study a natural
primitive entangling gate for this and related resonator-based architectures,
which consists of a CZ operation between a qubit and the bus. The CZ gate is
implemented with the aid of the non-computational qubit |2> state [F. W.
Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon
qubits with 300 MHz anharmonicity, we show that by using only low frequency
qubit-bias control it is possible to implement the qubit-bus CZ gate with 99.9%
(99.99%) fidelity in about 17ns (23ns) with a realistic two-parameter pulse
profile, plus two auxiliary z rotations. The fidelity measure we refer to here
is a state-averaged intrinsic process fidelity, which does not include any
effects of noise or decoherence. These results apply to a multi-qubit device
that includes strongly coupled memory resonators. We investigate the
performance of the qubit-bus CZ gate as a function of qubit anharmonicity,
indentify the dominant intrinsic error mechanism and derive an associated
fidelity estimator, quantify the pulse shape sensitivity and precision
requirements, simulate qubit-qubit CZ gates that are mediated by the bus
resonator, and also attempt a global optimization of system parameters
including resonator frequencies and couplings. Our results are relevant for a
wide range of superconducting hardware designs that incorporate resonators and
suggest that it should be possible to demonstrate a 99.9% CZ gate with existing
transmon qubits, which would constitute an important step towards the
development of an error-corrected superconducting quantum computer.
We introduce a frequency-multiplexed readout scheme for superconducting phase
qubits. Using a quantum circuit with four phase qubits, we couple each qubit to
a separate lumped-elementsuperconducting readout resonator, with the readout
resonators connected in parallel to a single measurement line. The readout
resonators and control electronics are designed so that all four qubits can be
read out simultaneously using frequency multiplexing on the one measurement
line. This technology provides a highly efficient and compact means for reading
out multiple qubits, a significant advantage for scaling up to larger numbers
of qubits.
Superconducting qubits probe environmental defects such as non-equilibrium
quasiparticles, an important source of decoherence. We show that „hot“
non-equilibrium quasiparticles,with energies above the superconducting gap,
affect qubits differently from quasiparticles at the gap, implying qubits can
probe the dynamic quasiparticle energy distribution. For hot quasiparticles, we
predict a non-neligable increase in the qubit excited state probability P_e. By
injecting hot quasiparticles into a qubit, we experimentally measure an
increase of P_e in semi-quantitative agreement with the model.