Non-Hermitian systems exhibit phenomena absent from Hermitian systems, including exceptional points (EPs), at which two or more eigenvectors coalesce. Conventional implementations relyon gain and loss, which strongly limit quantum coherence. Here, following a proposal by Wang and Clerk (PRA 2019), we realize a closed four-mode quantum system that emulates the dynamics of a PT dimer – two coupled resonators with balanced gain and loss – without engineered dissipation. The four modes are implemented as harmonics of a superconducting coplanar-waveguide resonator, with parametric couplings engineered using a current-pumped SNAIL. We use this device as a sensor for small variations in the PT dimer coupling strength. From signal-to-noise-ratio measurements, we observe enhanced sensitivity near the EP in a non-quantum-limited regime.
Quantum interconnects distribute entanglement via controlled light-matter interactions for quantum computing and sensing applications. Many entanglement generation schemes use coherent,reversible interactions that require precisely calibrated pulses to execute. In contrast, driven-dissipative protocols use a continuous-wave drive in the presence of correlated dissipation to stabilize entanglement in protected (dark) states. However, the same dissipation that generates the entanglement also limits its utility once the stabilization protocol ends. Here, we engineer a superconducting system of two giant artificial atoms coupled sequentially to a waveguide, with tunable individual and correlated dissipation enabled by interference between coupling points. Continuously driving the atoms through the waveguide exploits correlated dissipation to generate remote entanglement. We then tune the qubit frequencies in situ to suppress individual dissipation and thereby preserve the entanglement, achieving a Bell-state fidelity F = 0.89 +/- 0.02. This demonstration indicates that the driven dissipation of giant atoms is a viable approach for distributing entanglement across quantum networks.
Errors in superconducting qubits that are correlated in time and space can pose problems for quantum error correction codes. Radiation from cosmic and terrestrial sources can increasethe quasiparticle (QP) density in a superconducting qubit device, resulting in an increased rate of QPs tunneling across proximal Josephson junctions (JJs) and causing correlated errors. Mechanical vibrations, such as those induced by the pulse tube in a dry dilution refrigerator, are also a known source of correlated errors. We present a method for distinguishing these two types of errors by their temporal, spatial, and frequency domain features, enabling physically motivated error-mitigation strategies. We also present accelerometer data to study the correlation between dilution refrigerator vibrations and the errors. We measure arrays of transmon qubits where the difference in superconducting gap across the JJ is less than the qubit energy, as well as those where the gap is greater than the qubit energy, which has been shown to mitigate radiation-induced errors. We show that these latter devices are also protected against vibration-induced errors.
Impacts from high-energy particles cause correlated errors in superconducting qubits by increasing the quasiparticle density in the vicinity of the Josephson junctions (JJs). Such errorsare particularly harmful as they cannot be easily remedied via conventional error correcting codes. Recent experiments reduced correlated errors by making the difference in superconducting gap energy across the JJ larger than the qubit energy. In this work, we assess gap engineering near the JJ (δΔJJ) and the capacitor/ground-plane (δΔM1) by exposing arrays of transmon qubits to two sources of radiation. For α-particles from an 241Am source, we observe T1 errors correlated in space and time, supporting a hypothesis that hadronic cosmic rays are a major contributor to the 10−10 error floor observed in Ref. 1. For electrons from a pulsed linear accelerator, we observe temporally correlated T1 and T2 errors, this measurement is insensitive to spatial correlations. We observe that the severity of correlated T1 errors is reduced for qubit arrays with a greater degree of gap engineering at the JJ. For both T1 and T2 errors, the recovery time is hastened by an increased δΔM1, which we attribute to the trapping of quasiparticles into the capacitor/ground-plane. We construct a model of quasiparticle dynamics that qualitatively agrees with our observations. This work reinforces the multifaceted influence of radiation on superconducting qubits and provides strategies for improving radiation resilience.
Eliminating residual ZZ interactions in a two-qubit system is essential for reducing coherent errors during quantum operations. In a superconducting circuit platform, coupling two transmonqubits via a transmon coupler has been shown to effectively suppress residual ZZ interactions. However, in such systems, perfect cancellation usually requires the qubit-qubit detuning to be smaller than the individual qubit anharmonicities, which exacerbates frequency crowding and microwave crosstalk. To address this limitation, we introduce TFT (Transmon-Fluxonium-Transmon) architecture, wherein two transmon qubits are coupled via a fluxonium qubit. The coupling mediated by the fluxonium eliminates residual ZZ interactions even for transmons detuned larger than their anharmonicities. We experimentally identified zero-ZZ interaction points at qubit-qubit detunings of 409 MHz and 616 MHz from two distinct TFT devices. We then implemented an adiabatic, coupler-flux-biased controlled-Z gate on both devices, achieving CZ gate fidelities of 99.64(6)% and 99.68(8)%.
Non-Hermitian Hamiltonians with complex eigenenergies are useful tools for describing the dynamics of open quantum systems. In particular, parity and time (PT) symmetric Hamiltonianshave generated interest due to the emergence of exceptional-point degeneracies, where both eigenenergies and eigenvectors coalesce as the energy spectrum transitions from real- to complex-valued. Because of the abrupt spectral response near exceptional points, such systems have been proposed as candidates for precision quantum sensing. In this work, we emulate a passive \PT~dimer using a two-mode, non-Hermitian system of superconducting qubits comprising one high-coherence qubit coupled to an intentionally lossy qubit via a tunable coupler. The loss is introduced by strongly coupling the qubit to a continuum of photonic modes in an open waveguide environment. Using both pulsed and continuous-wave measurements, we characterize the system dynamics near the exceptional point. We observe a behavior broadly consistent with an ideal passive \PT~dimer with some corrections due to the tunable coupler element. We extract the complex eigenenergies associated with the two modes and calculate the sensitivity as a function of the coupling strength. Confirming theoretical predictions, we observe no sensitivity enhancement near the quantum exceptional point. This study elucidates the limitations of exceptional-point systems as candidates for quantum-enhanced sensing.
Reducing materials and processing-induced decoherence is critical to the development of utility-scale quantum processors based on superconducting qubits. Here we report on the impactof two fluorine-based wet etches, which we use to treat the silicon surface underneath the Josephson junctions (JJs) of fixed-frequency transmon qubits made with aluminum base metallization. Using several materials analysis techniques, we demonstrate that these surface treatments can remove germanium residue introduced by our JJ fabrication with no other changes to the overall process flow. These surface treatments result in significantly improved energy relaxation times for the highest performing process, with median T1=334 μs, corresponding to quality factor Q=6.6×106. This result suggests that the metal-substrate interface directly underneath the JJs was a major contributor to microwave loss in these transmon qubit circuits prior to integration of these surface treatments. Furthermore, this work illustrates how materials analysis can be used in conjunction with quantum device performance metrics to improve performance in superconducting qubits.
Noise from material defects at device interfaces is known to limit the coherence of superconducting circuits, yet our understanding of the defect origins and noise mechanisms remainsincomplete. Here we investigate the temperature and in-plane magnetic-field dependence of energy relaxation in a low-frequency fluxonium qubit, where the sensitivity to flux noise and charge noise arising from dielectric loss can be tuned by applied flux. We observe an approximately linear scaling of flux noise with temperature T and a power-law dependence of dielectric loss T3 up to 100 mK. Additionally, we find that the dielectric-loss-limited T1 decreases with weak in-plane magnetic fields, suggesting a potential magnetic-field response of the underlying charge-coupled defects. We implement a multi-level decoherence model in our analysis, motivated by the widely tunable matrix elements and transition energies approaching the thermal energy scale in our system. These findings offer insight for fluxonium coherence modeling and should inform microscopic theories of intrinsic noise in superconducting circuits.
Quantum interconnects facilitate entanglement distribution between non-local computational nodes. For superconducting processors, microwave photons are a natural means to mediate thisdistribution. However, many existing architectures limit node connectivity and directionality. In this work, we construct a chiral quantum interconnect between two nominally identical modules in separate microwave packages. We leverage quantum interference to emit and absorb microwave photons on demand and in a chosen direction between these modules. We optimize the protocol using model-free reinforcement learning to maximize absorption efficiency. By halting the emission process halfway through its duration, we generate remote entanglement between modules in the form of a four-qubit W state with 62.4 +/- 1.6% (leftward photon propagation) and 62.1 +/- 1.2% (rightward) fidelity, limited mainly by propagation loss. This quantum network architecture enables all-to-all connectivity between non-local processors for modular and extensible quantum computation.
In superconducting qubits, suppression of spontaneous emission is essential to achieve fast dispersive measurement and reset without sacrificing qubit lifetime. We show that resonator-mediateddecay of the qubit mode to the feedline can be suppressed using destructive interference, where the readout resonator is coupled to the feedline at two points. This „interferometric Purcell filter“ does not require dedicated filter components or impedance mismatch in the feedline, making it suitable for applications such as all-pass readout. We design and fabricate a device with the proposed scheme and demonstrate suppression of resonator-mediated decay that exceeds 2 orders of magnitude over a bandwidth of 400 MHz.