I am going to post here all newly submitted articles on the arXiv related to superconducting circuits. If your article has been accidentally forgotten, feel free to contact me
04
Sep
2019
Tunable three-body coupler for superconducting flux qubits
The implementation of many-body interactions is relevant in various areas of quantum information. We present a superconducting device that implements a strong and tunable three-body
interaction between superconducting quantum bits, with vanishing two-body interactions and robustness against noise and circuit parameter variations. These properties are confirmed by calculations based on the Born-Oppenheimer approximation, a two-level model for the coupling circuit, and numerical diagonalization. This circuit behaves as an ideal computational basis ZZZ coupler in a simulated three-qubit quantum annealing experiment. This work will be relevant for advanced quantum annealing protocols and future developments of high-order many-body interactions in quantum computers and simulators.
03
Sep
2019
Millimeter-Wave Four-Wave Mixing via Kinetic Inductance for Quantum Devices
Millimeter-wave superconducting devices offer a platform for quantum experiments at temperatures above 1 K, and new avenues for studying light-matter interactions in the strong coupling
regime. Using the intrinsic nonlinearity associated with kinetic inductance of thin film materials, we realize four-wave mixing at millimeter-wave frequencies, demonstrating a key component for superconducting quantum systems. We report on the performance of niobium nitride resonators around 100 GHz, patterned on thin (20-50 nm) films grown by atomic layer deposition, with sheet inductances up to 212 pH/square and critical temperatures up to 13.9 K. For films thicker than 20 nm, we measure quality factors from 1-6×104, likely limited by two-level systems. Finally we measure degenerate parametric conversion for a 95 GHz device with a forward efficiency up to +16 dB, paving the way for the development of nonlinear quantum devices at millimeter-wave frequencies.
30
Aug
2019
Methods for Measuring Magnetic Flux Crosstalk Between Tunable Transmons
In the gate model of quantum computing, a program is typically decomposed into a sequence of 1- and 2-qubit gates that are realized as control pulses acting on the system. A key requirement
for a scalable control system is that the qubits are addressable – that control pulses act only on the targeted qubits. The presence of control crosstalk makes this addressability requirement difficult to meet. In order to provide metrics that can drive requirements for decreasing crosstalk, we present three measurements that directly quantify the DC and AC flux crosstalk present between tunable transmons, with sensitivities as fine as 0.001%. We develop the theory to connect AC flux crosstalk measures to the infidelity of a parametrically activated two-qubit gate. We employ quantum process tomography in the presence of crosstalk to provide an empirical study of the effects of crosstalk on two-qubit gate fidelity.
29
Aug
2019
Assessing the Influence of Broadband Instrumentation Noise on Parametrically Modulated Superconducting Qubits
With superconducting transmon qubits — a promising platform for quantum information processing — two-qubit gates can be performed using AC signals to modulate a tunable
transmon’s frequency via magnetic flux through its SQUID loop. However, frequency tunablity introduces an additional dephasing mechanism from magnetic fluctuations. In this work, we experimentally study the contribution of instrumentation noise to flux instability and the resulting error rate of parametrically activated two-qubit gates. Specifically, we measure the qubit coherence time under flux modulation while injecting broadband noise through the flux control channel. We model the noise’s effect using a dephasing rate model that matches well to the measured rates, and use it to prescribe a noise floor required to achieve a desired two-qubit gate infidelity. Finally, we demonstrate that low-pass filtering the AC signal used to drive two-qubit gates between the first and second harmonic frequencies can reduce qubit sensitivity to flux noise at the AC sweet spot (ACSS), confirming an earlier theoretical prediction. The framework we present to determine instrumentation noise floors required for high entangling two-qubit gate fidelity should be extensible to other quantum information processing systems.
Onset of phase diffusion in high kinetic inductance granular aluminum micro-SQUIDs
Superconducting granular aluminum is attracting increasing interest due to its high kinetic inductance and low dissipation, favoring its use in kinetic inductance particle detectors,
superconducting resonators or quantum bits. We perform switching current measurements on DC-SQUIDs, obtained by introducing two identical geometric constrictions in granular aluminum rings of various normal-state resistivities in the range from ρn=250μΩcm to 5550μΩcm. The relative high kinetic inductance of the SQUID loop, in the range of tens of nH, leads to a suppression of the modulation in the measured switching current versus magnetic flux, accompanied by a distortion towards a triangular shape. We observe a change in the temperature dependence of the switching current histograms with increasing normal-state film resistivity. This behavior suggests the onset of a diffusive motion of the superconducting phase across the constrictions in the two-dimensional washboard potential of the SQUIDs, which could be caused by a change of the local electromagnetic environment of films with increasing normal-state resistivities.
27
Aug
2019
QuCAT: Quantum Circuit Analyzer Tool in Python
Quantum circuits constructed from Josephson junctions and superconducting electronics are key to many quantum computing and quantum optics applications. Designing these circuits involves
calculating the Hamiltonian describing their quantum behavior. Here we present QuCAT, or „Quantum Circuit Analyzer Tool“, an open-source framework to help in this task. This open-source Python library features an intuitive graphical or programmatical interface to create circuits, the ability to compute their Hamiltonian, and a set of complimentary functionalities such as calculating dissipation rates or visualizing current flow in the circuit.
Electric fields for light: Propagation of microwave photons along a synthetic dimension
The evenly-spaced modes of an electromagnetic resonator are coupled to each other by appropriate time-modulation, leading to dynamics analogous to those of particles hopping between
different sites of a lattice. This substitution of a real spatial dimension of a lattice with a „synthetic'“ dimension in frequency space greatly reduces the hardware complexity of an analog quantum simulator. Complex control and read-out of a highly multi-moded structure can thus be accomplished with very few physical control lines. We demonstrate this concept with microwave photons in a superconducting transmission line resonator by modulating the system parameters at frequencies near the resonator’s free spectral range and observing propagation of photon wavepackets in time domain. The linear propagation dynamics are equivalent to a tight-binding model, which we probe by measuring scattering parameters between frequency sites. We extract an approximate tight-binding dispersion relation for the synthetic lattice and initialize photon wavepackets with well-defined quasimomenta and group velocities. As an example application of this platform in simulating a physical system, we demonstrate Bloch oscillations associated with a particle in a periodic potential and subject to a constant external field. The simulated field strongly affects the photon dynamics despite photons having zero charge. Our observation of photon dynamics along a synthetic frequency dimension generalizes immediately to topological photonics and single-photon power levels, and expands the range of physical systems addressable by quantum simulation.
26
Aug
2019
Quantum bits with Josephson junctions
Already in the first edition of this book (Barone and Paterno, „Fundamentals and Physics and Applications of the Josephson Effect“, Wiley 1982), a great number of interesting
and important applications for Josephson junctions were discussed. In the decades that have passed since then, several new applications have emerged. This chapter treats one such new class of applications: quantum optics and quantum information processing (QIP) based on superconducting circuits with Josephson junctions. In this chapter, we aim to explain the basics of superconducting quantum circuits with Josephson junctions and demonstrate how these systems open up new prospects, both for QIP and for the study of quantum optics and atomic physics.
Amplitude and frequency sensing of microwave fields with a superconducting transmon qudit
Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial
semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave field can be inferred from the ac Stark shifts of higher transmon levels. In our time-resolved measurements, we employ a simple quantum sensing protocol, i.e. Ramsey fringes, allowing us to detect the amplitude of the systems transfer function over a range of several hundreds of MHz with an energy sensitivity on the order of 10−4. Combined with similar measurements for the phase of the transfer function, our sensing method can facilitate the microwave calibration of high fidelity quantum gates necessary for working with superconducting quantum circuits. Additionally, the potential to characterize arbitrary microwave fields promotes applications in related areas of research, such as quantum optics or hybrid microwave systems including photonic, mechanical or magnonic subsystems.
20
Aug
2019
Universal gates for protected superconducting qubits using optimal control
We employ quantum optimal control theory to realize quantum gates for two protected superconducting circuits: the heavy-fluxonium qubit and the 0-π qubit. Utilizing automatic differentiation
facilitates the simultaneous inclusion of multiple optimization targets, allowing one to obtain high-fidelity gates with realistic pulse shapes. For both qubits, disjoint support of low-lying wave functions prevents direct population transfer between the computational-basis states. Instead, optimal control favors dynamics involving higher-lying levels, effectively lifting the protection for a fraction of the gate duration. For the 0-π qubit, offset-charge dependence of matrix elements among higher levels poses an additional challenge for gate protocols. To mitigate this issue, we randomize the offset charge during the optimization process, steering the system towards pulse shapes insensitive to charge variations. Closed-system fidelities obtained are 99% or higher, and show slight reductions in open-system simulations.