I am going to post here all newly submitted articles on the arXiv related to superconducting circuits. If your article has been accidentally forgotten, feel free to contact me
23
Jul
2019
Fabrication and characterization of aluminum SQUID transmission lines
We report on the fabrication and characterization of 50 Ohms, flux-tunable, low-loss, SQUID-based transmission lines. The fabrication process relies on the deposition of a thin dielectric
layer (few tens of nanometers) via Atomic Layer Deposition (ALD) on top of a SQUID array, the whole structure is then covered by a non-superconducting metallic top ground plane. We present experimental results from five different samples. We systematically characterize their microscopic parameters by measuring the propagating phase in these structures. We also investigate losses and discriminate conductor from dielectric losses. This fabrication method offers several advantages. First, the SQUID array fabrication does not rely on a Niobium tri-layer process but on a simpler double angle evaporation technique. Second, ALD provides high quality dielectric leading to low-loss devices. Further, the SQUID array fabrication is based on a standard, all-aluminum process, allowing direct integration with superconducting qubits. Moreover, our devices are in-situ flux tunable, allowing mitigation of incertitude inherent to any fabrication process. Finally, the unit cell being a single SQUID (no extra ground capacitance is needed), it is straightforward to modulate the size of the unit cell periodically, allowing band-engineering. This fabrication process can be directly applied to traveling wave parametric amplifiers.
A photonic crystal Josephson traveling wave parametric amplifier
An amplifier combining noise performances as close as possible to the quantum limit with large bandwidth and high saturation power is highly desirable for many solid state quantum technologies
such as high fidelity qubit readout or high sensitivity electron spin resonance for example. Here we introduce a new Traveling Wave Parametric Amplifier based on Superconducting QUantum Interference Devices. It displays a 3 GHz bandwidth, a -102 dBm 1-dB compression point and added noise near the quantum limit. Compared to previous state-of-the-art, it is an order of magnitude more compact, its characteristic impedance is in-situ tunable and its fabrication process requires only two lithography steps. The key is the engineering of a gap in the dispersion relation of the transmission line. This is obtained using a periodic modulation of the SQUID size, similarly to what is done with photonic crystals. Moreover, we provide a new theoretical treatment to describe the non-trivial interplay between non-linearity and such periodicity. Our approach provides a path to co-integration with other quantum devices such as qubits given the low footprint and easy fabrication of our amplifier.
19
Jul
2019
Observation of Three-Photon Spontaneous Parametric Downconversion in a Superconducting Parametric Cavity
Spontaneous parametric downconversion (SPDC) has been a key enabling technology in exploring quantum phenomena and their applications for decades. For instance, traditional SPDC, which
splits a high energy pump photon into two lower energy photons, is a common way to produce entangled photon pairs. Since the early realizations of SPDC, researchers have thought to generalize it to higher order, e.g., to produce entangled photon triplets. However, directly generating photon triplets through a single SPDC process has remained elusive. Here, using a flux-pumped superconducting parametric cavity, we demonstrate direct three-photon SPDC, with photon triplets generated in a single cavity mode or split between multiple modes. With strong pumping, the states can be quite bright, with flux densities exceeding 60 photon/s/Hz. The observed states are strongly non-Gaussian, which has important implications for potential applications. In the single-mode case, we observe a triangular star-shaped distribution of quadrature voltages, indicative of the long-predicted „star state“. The observed star state shows strong third-order correlations, as expected for a state generated by a cubic Hamiltonian. By pumping at the sum frequency of multiple modes, we observe strong three-body correlations between multiple modes, strikingly, in the absence of second-order correlations. We further analyze the third-order correlations under mode transformations by the symplectic symmetry group, showing that the observed transformation properties serve to „fingerprint“ the specific cubic Hamiltonian that generates them. The observed non-Gaussian, third-order correlations represent an important step forward in quantum optics and may have a strong impact on quantum communication with microwave fields as well as continuous-variable quantum computation.
17
Jul
2019
A superfluid-tunable 3D transmon qubit
Superfluid helium at milli-Kelvin temperatures is a dielectric liquid with an extremely low loss tangent at microwave frequencies. As such, it is a promising candidate for incorporation
into hybrid quantum systems containing superconducting qubits. We demonstrate the viability of this hybrid systems approach by controllably immersing a three-dimensional superconducting transmon qubit in superfluid 4He. By measuring spectroscopic and coherence properties we find that the cavity, the qubit, and their coupling are all modified by the presence of the dielectric superfluid, which we analyze within the framework of circuit quantum electrodynamics (cQED). At temperatures relevant to quantum computing experiments, the energy relaxation time of the qubit is not significantly changed by the presence of the superfluid, while the pure dephasing time modestly increases, which we attribute to improved thermalization via the superfluid.
14
Jul
2019
Superconducting qubits beyond the dispersive regime
Superconducting circuits consisting of a few low-anharmonic transmons coupled to readout and bus resonators can perform basic quantum computations. Since the number of qubits in such
circuits is limited to not more than a few tens, the qubits can be designed to operate within the dispersive regime, where frequency detuning are much stronger than coupling strengths. However, scaling up the number of qubits will bring the circuit out of this regime and invalidates current theories. We develop a formalism that allows to consistently diagonalize superconducting circuit hamiltonian beyond dispersive regime. This will allow to study qubit-qubit interaction unperturbatively, therefore our formalism remains valid and accurate at small or even negligible frequency detuning; thus our formalism serves as a theoretical ground for designing qubit characteristics for scaling up the number of qubits in superconducting circuits. We study the most important circuits with single- and two-qubit gates, i.e. a single transmon coupled to a resonator and two transmons sharing a bus resonator. Surprisingly our formalism allows to determine the circuit characteristics, such as dressed frequencies and Kerr couplings, in closed-form formulas that not only reproduce perturbative results but also extrapolate beyond the dispersive regime and can ultimately reproduce (and even modify) the Jaynes-Cumming results at resonant frequencies.
10
Jul
2019
Efficient quasiparticle traps with low dissipation through gap engineering
Quasiparticles represent an intrinsic source of perturbation for superconducting qubits, leading to both dissipation of the qubit energy and dephasing. Recently, it has been shown that
normal-metal traps may efficiently reduce the quasiparticle population and improve the qubit lifetime, provided the trap surpasses a certain characteristic size. Moreover, while the trap itself introduces new relaxation mechanisms, they are not expected to harm state-of-the-art transmon qubits under the condition that the traps are not placed too close to extremal positions where electric fields are high. Here, we study a different type of trap, realized through gap engineering. We find that gap-engineered traps relax the remaining constraints imposed on normal metal traps. Firstly, the characteristic trap size, above which the trap is efficient, is reduced with respect to normal metal traps, such that here, strong traps are possible in smaller devices. Secondly, the losses caused by the trap are now greatly reduced, providing more flexibility in trap placement. The latter point is of particular importance, since for efficient protection from quasiparticles, the traps ideally should be placed close to the active parts of the qubit device, where electric fields are typically high.
Time-domain characterization and correction of on-chip distortion of control pulses in a quantum processor
We introduce Cryoscope, a method for sampling on-chip baseband pulses used to dynamically control qubit frequency in a quantum processor. We specifically use Cryoscope to measure the
step response of the dedicated flux control lines of two-junction transmon qubits in circuit QED processors with the temporal resolution of the room-temperature arbitrary waveform generator producing the control pulses. As a first application, we iteratively improve this step response using optimized real-time digital filters to counter the linear-dynamical distortion in the control line, as needed for high-fidelity, repeatable one- and two-qubit gates based on dynamical control of qubit frequency.
09
Jul
2019
Probing many-body localization phase transition with superconducting circuits
Chains of superconducting circuit devices provide a natural platform for studies of synthetic bosonic quantum matter. Motivated by the recent experimental progress in realizing disordered
and interacting chains of superconducting transmon devices, we study the bosonic many-body localization phase transition using the methods of exact diagonalization as well as matrix product state dynamics. We estimate the location of transition separating the ergodic and the many-body localized phases as a function of the disorder strength and the many-body on-site interaction strength. The main difference between the bosonic model realized by superconducting circuits and similar fermionic model is that the effect of the on-site interaction is stronger due to the possibility of multiple excitations occupying the same site. The phase transition is found to be robust upon including longer-range hopping and interaction terms present in the experiments. Furthermore, we calculate experimentally relevant local observables and show that their temporal fluctuations can be used to distinguish between the dynamics of Anderson insulator, many-body localization, and delocalized phases. While we consider unitary dynamics, neglecting the effects of dissipation, decoherence and measurement back action, the timescales on which the dynamics is unitary are sufficient for observation of characteristic dynamics in the many-body localized phase. Moreover, the experimentally available disorder strength and interactions allow for tuning the many-body localization phase transition, thus making the arrays of superconducting circuit devices a promising platform for exploring localization physics and phase transition.
Rabi oscillations in a superconducting nanowire circuit
We investigate the circuit quantum electrodynamics of superconducting nanowire oscillators. The sample circuit consists of a capacitively shunted nanowire with a width of about 20 nm
and a varying length up to 350 nm, capacitively coupled to an on-chip resonator. By applying microwave pulses we observe Rabi oscillations, measure coherence times and the anharmonicity of the circuit. Despite the very compact design, simple top-down fabrication and high degree of disorder in the oxidized (granular) aluminum material used, we observe lifetimes in the microsecond range.
05
Jul
2019
The superconducting quasicharge qubit
The non-dissipative non-linearity of a Josephson junction converts macroscopic superconducting circuits into artificial atoms, enabling some of the best controlled quantum bits (qubits)
today. Three fundamental types of superconducting qubits are known, each reflecting a distinct behavior of quantum fluctuations in a Cooper pair condensate: single charge tunneling (charge qubit), single flux tunneling (flux qubit), and phase oscillations (phase qubit). Yet, the dual nature of charge and flux suggests that circuit atoms must come in pairs. Here we introduce the missing one, named „blochnium“. It exploits a coherent insulating response of a single Josephson junction that emerges from the extension of phase fluctuations beyond the 2π-interval. Evidence for such effect was found in an out-of-equilibrium dc-transport through junctions connected to high-impedance leads, although a full consensus is absent to date. We shunt a weak junction with an exceptionally high-value inductance — the key technological innovation behind our experiment — and measure the rf-excitation spectrum as a function of external magnetic flux through the resulting loop. The junction’s insulating character manifests by the vanishing flux-sensitivity of the qubit transition between the ground and the first excited states, which nevertheless rapidly recovers for transitions to higher energy states. The spectrum agrees with a duality mapping of blochnium onto transmon, which replaces the external flux by the offset charge and introduces a new collective quasicharge variable in place of the superconducting phase. Our result unlocks the door to an unexplored regime of macroscopic quantum dynamics in ultrahigh-impedance circuits, which may have applications to quantum computing and quantum metrology of direct current.