Bosonic quantum error correction codes in superconducting quantum circuits

  1. W. Cai,
  2. Y. Ma,
  3. W. Wang,
  4. C.-L. Zou,
  5. and L. Sun
Quantum information is vulnerable to environmental noise and experimental imperfections, hindering the reliability of practical quantum information processors. Therefore, quantum error
correction (QEC) that can protect quantum information against noise is vital for universal and scalable quantum computation. Among many different experimental platforms, superconducting quantum circuits and bosonic encodings in superconducting microwave modes are appealing for their unprecedented potential in QEC. During the last few years, bosonic QEC is demonstrated to reach the break-even point, i.e. the lifetime of a logical qubit is enhanced to exceed that of any individual components composing the experimental system. Beyond that, universal gate sets and fault-tolerant operations on the bosonic codes are also realized, pushing quantum information processing towards the QEC era. In this article, we review the recent progress of the bosonic codes, including the Gottesman-Kitaev-Preskill codes, cat codes, and binomial codes, and discuss the opportunities of bosonic codes in various quantum applications, ranging from fault-tolerant quantum computation to quantum metrology. We also summarize the challenges associated with the bosonic codes and provide an outlook for the potential research directions in the long terms.

Witnessing quantum resource conversion within deterministic quantum computation using one pure superconducting qubit

  1. W. Wang,
  2. B. Yadin,
  3. Y. Ma,
  4. J. Ma,
  5. Y. Xu,
  6. L. Hu,
  7. H. Wang,
  8. Y. P. Song,
  9. Mile Gu,
  10. and L. Sun
Deterministic quantum computation with one qubit (DQC1) is iconic in highlighting that exponential quantum speedup may be achieved with negligible entanglement. Its discovery catalyzed
heated study of general quantum resources, and various conjectures regarding their role in DQC1’s performance advantage. Coherence and discord are prominent candidates, respectively characterizing non-classicality within localized and correlated systems. Here we realize DQC1 within a superconducting system, engineered such that the dynamics of coherence and discord can be tracked throughout its execution. We experimentally confirm that DQC1 acts as a resource converter, consuming coherence to generate discord during its operation. Our results highlight superconducting circuits as a promising platform for both realizing DQC1 and related algorithms, and experimentally characterizing resource dynamics within quantum protocols.

A two-fold quantum delayed-choice experiment in a superconducting circuit

  1. K. Liu,
  2. Y. Xu,
  3. W. Wang,
  4. Shi-Biao Zheng,
  5. Tanay Roy,
  6. Suman Kundu,
  7. Madhavi Chand,
  8. A. Ranadive,
  9. R. Vijay,
  10. Y. P. Song,
  11. L. M. Duan,
  12. and L. Sun
We propose and experimentally demonstrate a two-fold quantum delayed-choice experiment where wave or particle nature of a superconducting interfering device can be post-selected twice
after the interferometer. The wave-particle complementarity is controlled by a quantum which-path detector (WPD) in a superposition of its on and off states implemented through a superconducting cavity. The WPD projected to its on state records which-path information, which manifests the particle nature and destroys the interference associated with wave nature of the system. In our experiment, we can recover the interference signal through a quantum eraser even if the WPD has selected out the particle nature in the first round of delayed-choice detection, showing that a quantum WPD adds further unprecedented controllability to test of wave-particle complementarity through the peculiar quantum delayed-choice measurements.

Quantum network of superconducting qubits through opto-mechanical interface

  1. Zhang-qi Yin,
  2. W. L. Yang,
  3. L. Sun,
  4. and L. M. Duan
We propose a scheme to realize quantum networking of superconducting qubits based on the opto-mechanical interface. The superconducting qubits interact with the microwave photons, which
then couple to the optical photons through the opto-mechanical interface. The interface generates a quantum link between superconducting qubits and optical flying qubits with tunable pulse shapes and carrier frequencies, enabling transmission of quantum information to other superconducting or atomic qubits. We show that the scheme works under realistic experimental conditions and it also provides a way for fast initialization of the superconducting qubits under 1 K instead of 20 mK operation temperature.

Tracking Photon Jumps with Repeated Quantum Non-Demolition Parity Measurements

  1. L. Sun,
  2. A. Petrenko,
  3. Z. Leghtas,
  4. B. Vlastakis,
  5. G. Kirchmair,
  6. K. M. Sliwa,
  7. A. Narla,
  8. M. Hatridge,
  9. S. Shankar,
  10. J. Blumoff,
  11. L. Frunzio,
  12. M. Mirrahimi,
  13. M. H. Devoret,
  14. and R. J. Schoelkopf
Quantum error correction (QEC) is required for a practical quantum computer because of the fragile nature of quantum information. In QEC, information is redundantly stored in a large
Hilbert space and one or more observables must be monitored to reveal the occurrence of an error, without disturbing the information encoded in an unknown quantum state. Such observables, typically multi-qubit parities such as , must correspond to a special symmetry property inherent to the encoding scheme. Measurements of these observables, or error syndromes, must also be performed in a quantum non-demolition (QND) way and faster than the rate at which errors occur. Previously, QND measurements of quantum jumps between energy eigenstates have been performed in systems such as trapped ions, electrons, cavity quantum electrodynamics (QED), nitrogen-vacancy (NV) centers, and superconducting qubits. So far, however, no fast and repeated monitoring of an error syndrome has been realized. Here, we track the quantum jumps of a possible error syndrome, the photon number parity of a microwave cavity, by mapping this property onto an ancilla qubit. This quantity is just the error syndrome required in a recently proposed scheme for a hardware-efficient protected quantum memory using Schr\“{o}dinger cat states in a harmonic oscillator. We demonstrate the projective nature of this measurement onto a parity eigenspace by observing the collapse of a coherent state onto even or odd cat states. The measurement is fast compared to the cavity lifetime, has a high single-shot fidelity, and has a 99.8% probability per single measurement of leaving the parity unchanged. In combination with the deterministic encoding of quantum information in cat states realized earlier, our demonstrated QND parity tracking represents a significant step towards implementing an active system that extends the lifetime of a quantum bit.

Ten Milliseconds for Aluminum Cavities in the Quantum Regime

  1. M. Reagor,
  2. Hanhee Paik,
  3. G. Catelani,
  4. L. Sun,
  5. C. Axline,
  6. E. Holland,
  7. I.M. Pop,
  8. N.A. Masluk,
  9. T. Brecht,
  10. L. Frunzio,
  11. M.H. Devoret,
  12. L.I. Glazman,
  13. and R. J. Schoelkopf
A promising quantum computing architecture couples superconducting qubits to microwave resonators (circuit QED), a system in which three-dimensional microwave cavities have become a
valuable resource. Such cavities have surface-to-volume ratios, or participation ratios a thousandfold smaller than in planar devices, deemphasizing potentially lossy surface elements by an equal amount. Motivated by this principle, we have tested aluminum superconducting cavity resonators with internal quality factors greater than 0.5 billion and intrinsic lifetimes reaching 0.01 seconds at single photon power and millikelvin temperatures. These results are the first to explore the use of superconducting aluminum, a ubiquitous material in circuit QED, as the basis of highly coherent (Q~10^7-10^9) cavity resonators. Measurements confirm the cavities‘ predicted insensitivity to quasiparticles (kinetic inductance fraction-5ppm) and an absence of two level dielectric fluctuations.

Photon Shot Noise Dephasing in the Strong-Dispersive Limit of Circuit QED

  1. A. P. Sears,
  2. A. Petrenko,
  3. G. Catelani,
  4. L. Sun,
  5. Hanhee Paik,
  6. G. Kirchmair,
  7. L. Frunzio,
  8. L. I. Glazman,
  9. S. M. Girvin,
  10. and R. J. Schoelkopf
We study the photon shot noise dephasing of a superconducting transmon qubit in the strong-dispersive limit, due to the coupling of the qubit to its readout cavity. As each random arrival
or departure of a photon is expected to completely dephase the qubit, we can control the rate at which the qubit experiences dephasing events by varying textit{in situ} the cavity mode population and decay rate. This allows us to verify a pure dephasing mechanism that matches theoretical predictions, and in fact explains the increased dephasing seen in recent transmon experiments as a function of cryostat temperature. We investigate photon dynamics in this limit and observe large increases in coherence times as the cavity is decoupled from the environment. Our experiments suggest that the intrinsic coherence of small Josephson junctions, when corrected with a single Hahn echo, is greater than several hundred microseconds.