We present a detailed study of the coherence of a tunable capacitively-shunted flux qubit, designed for coherent quantum annealing applications. The measured relaxation at the qubitsymmetry point is mainly due to intrinsic flux noise in the main qubit loop for qubit frequencies below ∼3 GHz. At higher frequencies, thermal noise in the bias line makes a significant contribution to the relaxation, arising from the design choice to experimentally explore both fast annealing and high-frequency control. The measured dephasing rate is primarily due to intrinsic low-frequency flux noise in the two qubit loops, with additional contribution from the low-frequency noise of control electronics used for fast annealing. The flux-bias dependence of the dephasing time also reveals apparent noise correlation between the two qubit loops, possibly due to non-local sources of flux noise or junction critical-current noise. Our results are relevant for ongoing efforts toward building superconducting quantum annealers with increased coherence.
Flux tunability is an important engineering resource for superconducting circuits. Large-scale quantum computers based on flux-tunable superconducting circuits face the problem of fluxcrosstalk, which needs to be accurately calibrated to realize high-fidelity quantum operations. Typical calibration methods either assume that circuit elements can be effectively decoupled and simple models can be applied, or require a large amount of data. Such methods become ineffective as the system size increases and circuit interactions become stronger. Here we propose a new method for calibrating flux crosstalk, which is independent of the underlying circuit model. Using the fundamental property that superconducting circuits respond periodically to external fluxes, crosstalk calibration of N flux channels can be treated as N independent optimization problems, with the objective functions being the periodicity of a measured signal depending on the compensation parameters. We demonstrate this method on a small-scale quantum annealing circuit based on superconducting flux qubits, achieving comparable accuracy with previous methods. We also show that the objective function usually has a nearly convex landscape, allowing efficient optimization.
Landau-Zener (LZ) tunneling, describing transitions in a two-level system during a sweep through an anti-crossing, is a model applicable to a wide range of physical phenomena, suchas atomic collisions, chemical reactions, and molecular magnets, and has been extensively studied theoretically and experimentally. Dissipation due to coupling between the system and environment is an important factor in determining the transition rates. Here we report experimental results on the dissipative LZ transition. Using a tunable superconducting flux qubit, we observe for the first time the crossover from weak to strong coupling to the environment. The weak coupling limit corresponds to small system-environment coupling and leads to environment-induced thermalization. In the strong coupling limit, environmental excitations dress the system and transitions occur between the dressed states. Our results confirm previous theoretical studies of dissipative LZ tunneling in the weak and strong coupling limits. Our results for the intermediate regime are novel and could stimulate further theoretical development of open system dynamics. This work provides insight into the role of open system effects on quantum annealing, which employs quantum tunneling to search for low-energy solutions to hard computational problems.
Magnetic flux tunability is an essential feature in most approaches to quantum computing based on superconducting qubits. Independent control of the fluxes in multiple loops is hamperedby crosstalk. Calibrating flux crosstalk becomes a challenging task when the circuit elements interact strongly. We present a novel approach to flux crosstalk calibration, which is circuit model independent and relies on an iterative process to gradually improve calibration accuracy. This method allows us to reduce errors due to the inductive coupling between loops. The calibration procedure is automated and implemented on devices consisting of tunable flux qubits and couplers with up to 27 control loops. We devise a method to characterize the calibration error, which is used to show that the errors of the measured crosstalk coefficients are all below 0.17%.
As the field of superconducting quantum computing advances from the few-qubit stage to larger-scale processors, qubit addressability and extensibility will necessitate the use of 3Dintegration and packaging. While 3D integration is well-developed for commercial electronics, relatively little work has been performed to determine its compatibility with high-coherence solid-state qubits. Of particular concern, qubit coherence times can be suppressed by the requisite processing steps and close proximity of another chip. In this work, we use a flip-chip process to bond a chip with superconducting flux qubits to another chip containing structures for qubit readout and control. We demonstrate that high qubit coherence (T1, T2,echo>20μs) is maintained in a flip-chip geometry in the presence of galvanic, capacitive, and inductive coupling between the chips.
We observe the quantum Zeno effect — where the act of measurement slows the rate of quantum state transitions — in a superconducting qubit using linear circuit quantum electrodynamicsreadout and a near-quantum-limited following amplifier. Under simultaneous strong measurement and qubit drive, the qubit undergoes a series of quantum jumps between states. These jumps are visible in the experimental measurement record and are analyzed using maximum likelihood estimation to determine qubit transition rates. The observed rates agree with both analytical predictions and numerical simulations. The analysis methods are suitable for processing general noisy random telegraph signals
In this review, we discuss recent experiments that investigate how the quantum sate of a superconducting qubit evolves during measurement. We provide a pedagogical overview of the measurementprocess, when the qubit is dispersively coupled to a microwave frequency cavity, and the qubit state is encoded in the phase of a microwave tone that probes the cavity. A continuous measurement record is used to reconstruct the individual quantum trajectories of the qubit state, and quantum state tomography is performed to verify that the state has been tracked accurately. Furthermore, we discuss ensembles of trajectories, time-symmetric evolution, two-qubit trajectories, and potential applications in measurement-based quantum error correction.
The length of time that a quantum system can exist in a superposition state is determined by how strongly it interacts with its environment. This interaction entangles the quantum statewith the inherent fluctuations of the environment. If these fluctuations are not measured, the environment can be viewed as a source of noise, causing random evolution of the quantum system from an initially pure state into a statistical mixture-a process known as decoherence. However, by accurately measuring the environment in real time, the quantum system can be maintained in a pure state and its time evolution described by a quantum trajectory conditioned on the measurement outcome. We employ weak measurements to monitor a microwave cavity embedding a superconducting qubit and track the individual quantum trajectories of the system. In this architecture, the environment is dominated by the fluctuations of a single electromagnetic mode of the cavity. Using a near-quantum-limited parametric amplifier, we selectively measure either the phase or amplitude of the cavity field, and thereby confine trajectories to either the equator or a meridian of the Bloch sphere. We perform quantum state tomography at discrete times along the trajectory to verify that we have faithfully tracked the state of the quantum system as it diffuses on the surface of the Bloch sphere. Our results demonstrate that decoherence can be mitigated by environmental monitoring and validate the foundations of quantum feedback approaches based on Bayesian statistics. Moreover, our experiments suggest a new route for implementing what Schrodinger termed „quantum steering“-harnessing action at a distance to manipulate quantum states via measurement.
When a frequency chirped excitation is applied to a classical high-Q
nonlinear oscillator, its motion becomes dynamically synchronized to the drive
and large oscillation amplitude isobserved, provided the drive strength
exceeds the critical threshold for autoresonance. We demonstrate that when such
an oscillator is strongly coupled to a quantized superconducting qubit, both
the effective nonlinearity and the threshold become a non-trivial function of
the qubit-oscillator detuning. Moreover, the autoresonant threshold is
sensitive to the quantum state of the qubit and may be used to realize a high
fidelity, latching readout whose speed is not limited by the oscillator Q.
We demonstrate quantum bath engineering for a superconducting artificial atom
coupled to a microwave cavity. By tailoring the spectrum of microwave photon
shot noise in the cavity,we create a dissipative environment that autonomously
relaxes the atom to an arbitrarily specified coherent superposition of the
ground and excited states. In the presence of background thermal excitations,
this mechanism increases the state purity and effectively cools the dressed
atom state to a low temperature.