Errors in superconducting qubits that are correlated in time and space can pose problems for quantum error correction codes. Radiation from cosmic and terrestrial sources can increasethe quasiparticle (QP) density in a superconducting qubit device, resulting in an increased rate of QPs tunneling across proximal Josephson junctions (JJs) and causing correlated errors. Mechanical vibrations, such as those induced by the pulse tube in a dry dilution refrigerator, are also a known source of correlated errors. We present a method for distinguishing these two types of errors by their temporal, spatial, and frequency domain features, enabling physically motivated error-mitigation strategies. We also present accelerometer data to study the correlation between dilution refrigerator vibrations and the errors. We measure arrays of transmon qubits where the difference in superconducting gap across the JJ is less than the qubit energy, as well as those where the gap is greater than the qubit energy, which has been shown to mitigate radiation-induced errors. We show that these latter devices are also protected against vibration-induced errors.
Impacts from high-energy particles cause correlated errors in superconducting qubits by increasing the quasiparticle density in the vicinity of the Josephson junctions (JJs). Such errorsare particularly harmful as they cannot be easily remedied via conventional error correcting codes. Recent experiments reduced correlated errors by making the difference in superconducting gap energy across the JJ larger than the qubit energy. In this work, we assess gap engineering near the JJ (δΔJJ) and the capacitor/ground-plane (δΔM1) by exposing arrays of transmon qubits to two sources of radiation. For α-particles from an 241Am source, we observe T1 errors correlated in space and time, supporting a hypothesis that hadronic cosmic rays are a major contributor to the 10−10 error floor observed in Ref. 1. For electrons from a pulsed linear accelerator, we observe temporally correlated T1 and T2 errors, this measurement is insensitive to spatial correlations. We observe that the severity of correlated T1 errors is reduced for qubit arrays with a greater degree of gap engineering at the JJ. For both T1 and T2 errors, the recovery time is hastened by an increased δΔM1, which we attribute to the trapping of quasiparticles into the capacitor/ground-plane. We construct a model of quasiparticle dynamics that qualitatively agrees with our observations. This work reinforces the multifaceted influence of radiation on superconducting qubits and provides strategies for improving radiation resilience.
Reducing materials and processing-induced decoherence is critical to the development of utility-scale quantum processors based on superconducting qubits. Here we report on the impactof two fluorine-based wet etches, which we use to treat the silicon surface underneath the Josephson junctions (JJs) of fixed-frequency transmon qubits made with aluminum base metallization. Using several materials analysis techniques, we demonstrate that these surface treatments can remove germanium residue introduced by our JJ fabrication with no other changes to the overall process flow. These surface treatments result in significantly improved energy relaxation times for the highest performing process, with median T1=334 μs, corresponding to quality factor Q=6.6×106. This result suggests that the metal-substrate interface directly underneath the JJs was a major contributor to microwave loss in these transmon qubit circuits prior to integration of these surface treatments. Furthermore, this work illustrates how materials analysis can be used in conjunction with quantum device performance metrics to improve performance in superconducting qubits.
Quantum information processing at scale will require sufficiently stable and long-lived qubits, likely enabled by error-correction codes. Several recent superconducting-qubit experiments,however, reported observing intermittent spatiotemporally correlated errors that would be problematic for conventional codes, with ionizing radiation being a likely cause. Here, we directly measured the cosmic-ray contribution to spatiotemporally correlated qubit errors. We accomplished this by synchronously monitoring cosmic-ray detectors and qubit energy-relaxation dynamics of 10 transmon qubits distributed across a 5x5x0.35 mm3 silicon chip. Cosmic rays caused correlated errors at a rate of 1/(10 min), accounting for 17±1% of all such events. Our qubits responded to essentially all of the cosmic rays and their secondary particles incident on the chip, consistent with the independently measured arrival flux. Moreover, we observed that the landscape of the superconducting gap in proximity to the Josephson junctions dramatically impacts the qubit response to cosmic rays. Given the practical difficulties associated with shielding cosmic rays, our results indicate the importance of radiation hardening — for example, superconducting gap engineering — to the realization of robust quantum error correction.