In circuit quantum electrodynamics systems, the quasiparticle-related losses in Josephson junctions are suppressed due to the gap in the superconducting density of states which is muchhigher than the typical energy of a microwave photon. In this work, we show that a strong drive even at frequency lower than the double superconducting gap enables dissipation in the junctions due to photon-assisted breaking of the Cooper pairs. Both the decay rate and noise strength associated with the losses are sensitive to the dc phase bias of the junction and can be tuned in a broad range by the amplitude and the frequency of the external driving field, making the suggested mechanism potentially attractive for designing tunable dissipative elements. Furthermore, pronounced memory effects in the driven Josephson junctions render them perspective for both theoretical and experimental study of non-Markovian physics in superconducting quantum circuits. We illustrate our theoretical findings by studying the spectral properties and the steady state population of a low impedance resonator coupled to the driven Josephson junction.
Scaling up a superconducting quantum computer will likely require quantum communication between remote chips, which can be implemented using an itinerant microwave photon in a transmissionline. To realize high-fidelity communication, it is essential to control the frequency and temporal shape of the microwave photon. In this work, we demonstrate the generation of frequency-tunable shaped microwave photons without resorting to any frequency-tunable circuit element. We develop a framework which treats a microwave resonator as a band-pass filter mediating the interaction between a superconducting qubit and the modes in the transmission line. This interpretation allows us to stimulate the photon emission by an off-resonant drive signal. We characterize how the frequency and temporal shape of the generated photon depends on the frequency and amplitude of the drive signal. By modulating the drive amplitude and frequency, we achieve a frequency tunability of 40 MHz while maintaining the photon mode shape this http URL measurements of the quadrature amplitudes of the emitted photons, we demonstrate consistently high state and process fidelities around 95\% across the tunable frequency range. Our hardware-efficient approach eliminates the need for additional biasing lines typically required for frequency tuning, offering a simplified architecture for scalable quantum communication.
Superconducting qubits are one of the most promising physical systems for implementing a quantum computer. However, executing quantum algorithms of practical computational advantagerequires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.890 GHz, an energy relaxation time with a median of 502 us and a maximum of (765 +/- 82.6) us, and an echo dephasing time with a median of 541 us and a maximum of (1057 +/- 138) us. We report details of our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry.
Residual noise photons in a readout resonator become a major source of dephasing for a superconducting qubit when the resonator is optimized for a fast, high-fidelity dispersive readout.Here, we propose and demonstrate a nonlinear Purcell filter that suppresses such an undesired dephasing process without sacrificing the readout performance. When a readout pulse is applied, the filter automatically reduces the effective linewidth of the readout resonator, increasing the sensitivity of the qubit to the input field. The noise tolerance of the device we fabricated is shown to be enhanced by a factor of three relative to a device with a linear filter. The measurement rate is enhanced by another factor of three by utilizing the bifurcation of the nonlinear filter. A readout fidelity of 99.4% and a QND fidelity of 99.2% are achieved using a 40-ns readout pulse. The nonlinear Purcell filter will be an effective tool for realizing a fast, high-fidelity readout without compromising the coherence time of the qubit.
Coupling a resonator to a superconducting qubit enables various operations on the qubit including dispersive readout and unconditional reset. The speed of these operations is limitedby the external decay rate of the resonator. However, increasing the decay rate also increases the rate of qubit decay via the resonator, limiting the qubit lifetime. Here, we demonstrate that the resonator-mediated qubit decay can be suppressed by utilizing the distributed-element, multi-mode nature of the resonator. We show that the suppression exceeds two orders of magnitude over a bandwidth of 600 MHz. We use this „intrinsic Purcell filter“ to demonstrate a 40-ns readout with 99.1% fidelity and a 100-ns reset with residual excitation of less than 1.7%.
Superconducting circuits offer a scalable platform for the construction of large-scale quantum networks where information can be encoded in multiple temporal modes of propagating microwaves.Characterization of such microwave signals with a method extendable to an arbitrary number of temporal modes with a single detector and demonstration of their phase-robust nature are of great interest. Here we show the on-demand generation and Wigner tomography of a microwave time-bin qubit with superconducting circuit quantum electrodynamics architecture. We perform the tomography with a single heterodyne detector by dynamically changing the measurement quadrature with a phase-sensitive amplifier independently for the two temporal modes. By generating and measuring the qubits with hardware lacking a shared phase reference, we demonstrate conservation of phase information in each time-bin qubit generated.