Fluxonium qubits are recognized for their high coherence times and high operation fidelities, attributed to their unique design incorporating over 100 Josephson junctions per superconductingloop. However, this complexity poses significant fabrication challenges, particularly in achieving high yield and junction uniformity with traditional methods. Here, we introduce an overlap process for Josephson junction fabrication that achieves nearly 100% yield and maintains uniformity across a 2-inch wafer with less than 5% variation for the phase slip junction and less than 2% for the junction array. Our compact junction array design facilitates fluxonium qubits with energy relaxation times exceeding 1 millisecond at the flux frustration point, demonstrating consistency with state-of-the-art dielectric loss tangents and flux noise across multiple devices. This work suggests the scalability of high coherence fluxonium processors using CMOS-compatible processes, marking a significant step towards practical quantum computing.
Using a fluxonium qubit with in situ tunability of its Josephson energy, we characterize its energy relaxation at different flux biases as well as different Josephson energy values.The relaxation rate at qubit energy values, ranging more than one order of magnitude around the thermal energy kBT, can be quantitatively explained by a combination of dielectric loss and 1/f flux noise with a crossover point. The amplitude of the 1/f flux noise is consistent with that extracted from the qubit dephasing measurements at the flux sensitive points. In the dielectric loss dominant regime, the loss is consistent with that arises from the electric dipole interaction with two-level-system (TLS) defects. In particular, as increasing Josephson energy thus decreasing qubit frequency at the flux insensitive spot, we find that the qubit exhibits increasingly weaker coupling to TLS defects thus desirable for high-fidelity quantum operations.
Dielectric loss is one of the major decoherence sources of superconducting qubits. Contemporary high-coherence superconducting qubits are formed by material systems mostly consistingof superconducting films on substrate with low dielectric loss, where the loss mainly originates from the surfaces and interfaces. Among the multiple candidates for material systems, a combination of titanium nitride (TiN) film and sapphire substrate has good potential because of its chemical stability against oxidization, and high quality at interfaces. In this work, we report a TiN film deposited onto sapphire substrate achieving low dielectric loss at the material interface. Through the systematic characterizations of a series of transmon qubits fabricated with identical batches of TiN base layers, but different geometries of qubit shunting capacitors with various participation ratios of the material interface, we quantitatively extract the loss tangent value at the substrate-metal interface smaller than 8.9×10−4 in 1-nm disordered layer. By optimizing the interface participation ratio of the transmon qubit, we reproducibly achieve qubit lifetimes of up to 300 μs and quality factors approaching 8 million. We demonstrate that TiN film on sapphire substrate is an ideal material system for high-coherence superconducting qubits. Our analyses further suggest that the interface dielectric loss around the Josephson junction part of the circuit could be the dominant limitation of lifetimes for state-of-the-art transmon qubits.
Superconducting qubits provide a promising path toward building large-scale quantum computers. The simple and robust transmon qubit has been the leading platform, achieving multiplemilestones. However, fault-tolerant quantum computing calls for qubit operations at error rates significantly lower than those exhibited in the state of the art. Consequently, alternative superconducting qubits with better error protection have attracted increasing interest. Among them, fluxonium is a particularly promising candidate, featuring large anharmonicity and long coherence times. Here, we engineer a fluxonium-based quantum processor that integrates high qubit-coherence, fast frequency-tunability, and individual-qubit addressability for reset, readout, and gates. With simple and fast gate schemes, we achieve an average single-qubit gate fidelity of 99.97% and a two-qubit gate fidelity of up to 99.72%. This performance is comparable to the highest values reported in the literature of superconducting circuits. Thus our work, for the first time within the realm of superconducting qubits, reveals an approach toward fault-tolerant quantum computing that is alternative and competitive to the transmon system.
Nonadiabatic holonomic quantum computation has received increasing attention due to its robustness against control errors as well as high-speed realization. The original protocol ofnonadiabatic holonomic one-qubit gates has been experimentally demonstrated with superconducting transmon qutrit. However, the original protocol requires two noncommuting gates to realize an arbitrary one-qubit gate, which doubles the exposure time of gates to error sources and therefore makes the gates vulnerable to environment-induced decoherence. Single-shot protocol was subsequently proposed to realize an arbitrary one-qubit nonadiabatic holonomic gate. In this paper, we experimentally realize the single-shot protocol of nonadiabatic holonomic single qubit gates with a superconducting Xmon qutrit, where all the Clifford element gates are realized by a single-shot implementation. Characterized by quantum process tomography and randomized benchmarking, the single-shot gates reach a fidelity larger than 99%.
In a `shortcut-to-adiabaticity‘ (STA) protocol, the counter-diabatic Hamiltonian, which suppresses the non-adiabatic transition of a reference `adiabatic‘ trajectory, inducesa quantum uncertainty of the work cost in the framework of quantum thermodynamics. Following a theory derived recently [Funo et al 2017 Phys. Rev. Lett. 118 100602], we perform an experimental measurement of the STA work statistics in a high-quality superconducting Xmon qubit. Through the frozen-Hamiltonian and frozen-population techniques, we experimentally realize the two-point measurement of the work distribution for given initial eigenstates. Our experimental statistics verify (i) the conservation of the average STA work and (ii) the equality between the STA excess of work fluctuations and the quantum geometric tensor.
The significance of topological phases has been widely recognized in the community of condensed matter physics. The well controllable quantum systems provide an artificial platformto probe and engineer various topological phases. The adiabatic trajectory of a quantum state describes the change of the bulk Bloch eigenstates with the momentum, and this adiabatic simulation method is however practically limited due to quantum dissipation. Here we apply the `shortcut to adiabaticity‘ (STA) protocol to realize fast adiabatic evolutions in the system of a superconducting phase qubit. The resulting fast adiabatic trajectories illustrate the change of the bulk Bloch eigenstates in the Su-Schrieffer-Heeger (SSH) model. A sharp transition is experimentally determined for the topological invariant of a winding number. Our experiment helps identify the topological Chern number of a two-dimensional toy model, suggesting the applicability of the fast adiabatic simulation method for topological systems.
With a counter-diabatic field supplemented to the reference control field, the `shortcut to adiabaticiy‘ (STA) protocol is implemented in a superconducting phase qubit. The Berryphase measured in a short time scale is in good agreement with the theoretical result acquired from an adiabatic loop. The trajectory of a qubit vector is extracted, verifying the Berry phase alternatively by the integrated solid angle. The classical noise is introduced to the amplitude or phase of the total control field. In the statistics of the Berry phase, the mean with either noise is almost equal to that without noise, while the variation with the amplitude noise can be described by an analytical expression.