Quantum computation architecture based on d-level systems, or qudits, has attracted considerable attention recently due to their enlarged Hilbert space. Extensive theoretical and experimentalstudies have addressed aspects of algorithms and benchmarking techniques for qudit-based quantum computation and quantum information processing. Here, we report a physical realization of qudit with upto 4 embedded levels in a superconducting transmon, demonstrating high-fidelity initialization, manipulation, and simultaneous multi-level readout. In addition to constructing SU(d) operations and benchmarking protocols for quantum state tomography, quantum process tomography, and randomized benchmarking etc, we experimentally carry out these operations for d=3 and d=4. Moreover, we perform prototypical quantum algorithms and observe outcomes consistent with expectations. Our work will hopefully stimulate further research interest in developing manipulation protocols and efficient applications for quantum processors with qudits.
Crosstalk is a major concern in the implementation of large-scale quantum computation since it can degrade the performance of qubit addressing and cause gate errors. Finding the originof crosstalk and separating contributions from different channels are essential prerequisites for figuring out crosstalk mitigation schemes. Here, by performing circuit analysis of two coupled floating transmon qubits, we demonstrate that, even if the stray coupling, e.g., between a qubit and the drive line of its nearby qubit, is absent, microwave crosstalk between qubits can still exist due to the presence of a spurious crosstalk channel. This channel arises from free modes, which are supported by the floating structure of transmon qubits, i.e., the two superconducting islands of the qubits have no galvanic connection to the ground. For various geometric layouts of floating transmon qubits, we give the contributions of microwave crosstalk from the spurious channel and show that this channel can become a performance-limiting factor in qubit addressing. This research could provide guidance for suppressing microwave crosstalk between floating superconducting qubits through the design of qubit circuits.
Floquet engineering, i.e. driving the system with periodic Hamiltonians, not only provides great flexibility in analog quantum simulation, but also supports phase structures of greatrichness. It has been proposed that Floquet systems can support a discrete time-translation symmetry (TTS) broken phase, dubbed the discrete time crystal (DTC). This proposal, as well as the exotic phase, has attracted tremendous interest among the community of quantum simulation. Here we report the observation of the DTC in an one-dimensional superconducting qubit chain. We experimentally realize long-time stroboscopic quantum dynamics of a periodically driven spin system consisting of 8 transmon qubits, and obtain a lifetime of the DTC order limited by the coherence time of the underlying physical platform. We also explore the crossover between the discrete TTS broken and unbroken phases via various physical signatures. Our work extends the usage of superconducting circuit systems in quantum simulation of many-body physics, and provides an experimental tool for investigating non-equilibrium dynamics and phase structures.
Significant progress has been made in building large-scale superconducting quantum processors based on flip-chip technology. In this work, we use the flip-chip technology to realizea modified transmon qubit, donated as the „flipmon“, whose large shunt capacitor is replaced by a vacuum-gap parallel plate capacitor. To further reduce the qubit footprint, we place one of the qubit pads and a single Josephson junction on the bottom chip and the other pad on the top chip which is galvanically connected with the single Josephson junction through an indium bump. The electric field participation ratio can arrive at nearly 53% in air when the vacuum-gap is about 5 microns, and thus potentially leading to a lower dielectric loss. The coherence times of the flipmons are measured in the range of 30-60 microseconds, which are comparable with that of traditional transmons with similar fabrication processes. The electric field simulation indicates that the metal-air interface’s participation ratio increases significantly and may dominate the qubit’s decoherence. This suggests that more careful surface treatment needs to be considered. No evidence shows that the indium bumps inside the flipmons cause significant decoherence. With well-designed geometry and good surface treatment, the coherence of the flipmons can be further improved.
By using the dry etching process of tantalum (Ta) film, we had obtained transmon qubit with the best lifetime (T1) 503 us, suggesting that the dry etching process can be adopted inthe following multi-qubit fabrication with Ta film. We also compared the relaxation and coherence times of transmons made with different materials (Ta, Nb and Al) with the same design and fabrication processes of Josephson junction, we found that samples prepared with Ta film had the best performance, followed by those with Al film and Nb film. We inferred that the reason for this difference was due to the different loss of oxide materials located at the metal-air interface.
High fidelity two-qubit gates are fundamental for scaling up the superconducting number. We use two qubits coupled via a frequency-tunable coupler which can adjust the coupling strength,and demonstrate the CZ gate using two different schemes, adiabatic and di-adiabatic methods. The Clifford based Randomized Benchmarking (RB) method is used to assess and optimize the CZ gate fidelity. The fidelity of adiabatic and di-adiabatic CZ gates are 99.53(8)% and 98.72(2)%, respectively. We also analyze the errors induced by the decoherence, which are 92% of total for adiabatic CZ gate and 46% of total for di-adiabatic CZ gates. The adiabatic scheme is robust against the operation error. But the di-adiabatic scheme is sensitive to the purity and operation errors. Comparing to 30 ns duration time of adiabatic CZ gate, the duration time of di-adiabatic CZ gate is 19 ns, revealing lower incoherence error rincoherent,Clfford = 0.0197(5) than r′incoherent,Clfford = 0.0223(3).
Using geometric phases to realize noise-resilient quantum computing is an important method to enhance the control fidelity. In this work, we experimentally realize a universal nonadiabaticgeometric quantum gate set in a superconducting qubit chain. We characterize the realized single- and two-qubit geometric gates with both quantum process tomography and randomized benchmarking methods. The measured average fidelities for the single-qubit rotation gates and two-qubit controlled-Z gate are 0.9977 and 0.977, respectively. Besides, we also experimentally demonstrate the noise-resilient feature of the realized single-qubit geometric gates by comparing their performance with the conventional dynamic gates with different types of errors in the control field. Thus, our experiment proves a way to achieve high-fidelity geometric quantum gates for robust quantum computation.
Searching topological states of matter in tunable artificial systems has recently become a rapidly growing field of research. Meanwhile, significant experimental progresses on observingtopological phenomena have been made in superconducting circuits. However, topological insulator states have not yet been reported in this system. Here, for the first time, we experimentally realize a spin version of the Su-Schrieffer-Heeger model and observe the topological magnon insulator states in a superconducting qubit chain, which manifest both topological invariants and topological edge states. Based on simply monitoring the time evolution of a singlequbit excitation in the chain, we demonstrate that the topological winding numbers and the topological magnon edge and soliton states can all be directly observed. Our work thus opens a new avenue to use controllable qubit chain system to explore novel topological states of matter and also offers exciting possibilities for topologically protected quantum information processing.