Low-noise kinetic inductance traveling-wave amplifier using three-wave mixing

  1. Michael R. Vissers,
  2. Robert P. Erickson,
  3. Hsiang-Sheng Ku,
  4. Leila Vale,
  5. Xian Wu,
  6. Gene Hilton,
  7. and David P. Pappas
We have fabricated a wide-bandwidth, high dynamic range, low-noise cryogenic amplifier based on a superconducting kinetic inductance traveling-wave device. The device was made from
NbTiN and consisted of a long, coplanar waveguide on a silicon chip. By adding a DC current and an RF pump tone we are able to generate parametric amplification using three-wave mixing. The devices exhibit gain of more than 15 dB across an instantaneous bandwidth from 4 to 8 GHz. The total usable gain bandwidth, including both sides of the signal-idler gain region, is more than 6 GHz. The noise referred to the input of the devices approaches the quantum limit, with less than 1 photon excess noise. Compared to similarly constructed four-wave mixing amplifiers, these devices operate with the RF pump at ∼20 dB lower power and at frequencies far from the signal. This will permit easier integration into large scale qubit and detector applications.