Floquet Engineering of Anisotropic Transverse Interactions in Superconducting Qubits

  1. Yongqi Liang,
  2. Wenhui Huang,
  3. Libo Zhang,
  4. Ziyu Tao,
  5. Kai Tang,
  6. Ji Chu,
  7. Jiawei Qiu,
  8. Xuandong Sun,
  9. Yuxuan Zhou,
  10. Jiawei Zhang,
  11. Jiajian Zhang,
  12. Weijie Guo,
  13. Yang Liu,
  14. Yuanzhen Chen,
  15. Song Liu,
  16. Youpeng Zhong,
  17. Jingjing Niu,
  18. and Dapeng Yu
Superconducting transmon qubits have established as a leading candidate for quantum computation, as well as a flexible platform for exploring exotic quantum phases and dynamics. However,
physical coupling naturally yields isotropic transverse interactions between qubits, restricting their access to diverse quantum phases that require spatially dependent interactions. Here, we demonstrate the simultaneous realization of both pairing (XX-YY) and hopping (XX+YY) interactions between transmon qubits by Floquet engineering. The coherent superposition of these interactions enables independent control over the XX and YY terms, yielding anisotropic transverse interactions. By aligning the transverse interactions along a 1D chain of six qubits, as calibrated via Aharonov-Bohm interference in synthetic space, we synthesize a transverse field Ising chain model and explore its dynamical phase transition under varying external field. The scalable synthesis of anisotropic transverse interactions paves the way for the implementation of more complex physical systems requiring spatially dependent interactions, enriching the toolbox for engineering quantum phases with superconducting qubits.

In situ mixer calibration for superconducting quantum circuits

  1. Nan Wu,
  2. Jing Lin,
  3. Changrong Xie,
  4. Zechen Guo,
  5. Wenhui Huang,
  6. Libo Zhang,
  7. Yuxuan Zhou,
  8. Xuandong Sun,
  9. Jiawei Zhang,
  10. Weijie Guo,
  11. Xiayu Linpeng,
  12. Song Liu,
  13. Yang Liu,
  14. Wenhui Ren,
  15. Ziyu Tao,
  16. Ji Jiang,
  17. Ji Chu,
  18. Jingjing Niu,
  19. Youpeng Zhong,
  20. and Dapeng Yu
Mixers play a crucial role in superconducting quantum computing, primarily by facilitating frequency conversion of signals to enable precise control and readout of quantum states. However,
imperfections, particularly carrier leakage and unwanted sideband signal, can significantly compromise control fidelity. To mitigate these defects, regular and precise mixer calibrations are indispensable, yet they pose a formidable challenge in large-scale quantum control. Here, we introduce an in situ calibration technique and outcome-focused mixer calibration scheme using superconducting qubits. Our method leverages the qubit’s response to imperfect signals, allowing for calibration without modifying the wiring configuration. We experimentally validate the efficacy of this technique by benchmarking single-qubit gate fidelity and qubit coherence time.

M2CS: A Microwave Measurement and Control System for Large-scale Superconducting Quantum Processors

  1. Jiawei Zhang,
  2. Xuandong Sun,
  3. Zechen Guo,
  4. Yuefeng Yuan,
  5. Yubin Zhang,
  6. Ji Chu,
  7. Wenhui Huang,
  8. Yongqi Liang,
  9. Jiawei Qiu,
  10. Daxiong Sun,
  11. Ziyu Tao,
  12. Jiajian Zhang,
  13. Weijie Guo,
  14. Ji Jiang,
  15. Xiayu Linpeng,
  16. Yang Liu,
  17. Wenhui Ren,
  18. Jingjing Niu,
  19. Youpeng Zhong,
  20. and Dapeng Yu
As superconducting quantum computing continues to advance at an unprecedented pace, there is a compelling demand for the innovation of specialized electronic instruments that act as
crucial conduits between quantum processors and host computers. Here, we introduce a Microwave Measurement and Control System (M2CS) dedicated for large-scale superconducting quantum processors. M2CS features a compact modular design that balances overall performance, scalability, and flexibility. Electronic tests of M2CS show key metrics comparable to commercial instruments. Benchmark tests on transmon superconducting qubits further show qubit coherence and gate fidelities comparable to state-of-the-art results, confirming M2CS’s capability to meet the stringent requirements of quantum experiments run on intermediate-scale quantum processors. The system’s compact and scalable design offers significant room for further enhancements that could accommodate the measurement and control requirements of over 1000 qubits, and can also be adopted to other quantum computing platforms such as trapped ions and silicon quantum dots. The M2CS architecture may also be applied to wider range of scenarios, such as microwave kinetic inductance detectors, as well as phased array radar systems.

Noise-induced quantum synchronization and maximally entangled mixed states in superconducting circuits

  1. Ziyu Tao,
  2. Finn Schmolke,
  3. Chang-Kang Hu,
  4. Wenhui Huang,
  5. Yuxuan Zhou,
  6. Jiawei Zhang,
  7. Ji Chu,
  8. Libo Zhang,
  9. Xuandong Sun,
  10. Zecheng Guo,
  11. Jingjing Niu,
  12. Wenle Weng,
  13. Song Liu,
  14. Youpeng Zhong,
  15. Dian Tan,
  16. Dapeng Yu,
  17. and Eric Lutz
Random fluctuations can lead to cooperative effects in complex systems. We here report the experimental observation of noise-induced quantum synchronization in a chain of superconducting
transmon qubits with nearest-neighbor interactions. The application of Gaussian white noise to a single site leads to synchronous oscillations in the entire chain. We show that the two synchronized end qubits are entangled, with nonzero concurrence, and that they belong to a class of generalized Bell states known as maximally entangled mixed states, whose entanglement cannot be increased by any global unitary. We further demonstrate the stability against frequency detuning of both synchronization and entanglement by determining the corresponding generalized Arnold tongue diagrams. Our results highlight the constructive influence of noise in a quantum many-body system and uncover the potential role of synchronization for mixed-state quantum information science.

Coupler-Assisted Leakage Reduction for Scalable Quantum Error Correction with Superconducting Qubits

  1. Xiaohan Yang,
  2. Ji Chu,
  3. Zechen Guo,
  4. Wenhui Huang,
  5. Yongqi Liang,
  6. Jiawei Liu,
  7. Jiawei Qiu,
  8. Xuandong Sun,
  9. Ziyu Tao,
  10. Jiawei Zhang,
  11. Jiajian Zhang,
  12. Libo Zhang,
  13. Yuxuan Zhou,
  14. Weijie Guo,
  15. Ling Hu,
  16. Ji Jiang,
  17. Yang Liu,
  18. Xiayu Linpeng,
  19. Tingyong Chen,
  20. Yuanzhen Chen,
  21. Jingjing Niu,
  22. Song Liu,
  23. Youpeng Zhong,
  24. and Dapeng Yu
Superconducting qubits are a promising platform for building fault-tolerant quantum computers, with recent achievement showing the suppression of logical error with increasing code
size. However, leakage into non-computational states, a common issue in practical quantum systems including superconducting circuits, introduces correlated errors that undermine QEC scalability. Here, we propose and demonstrate a leakage reduction scheme utilizing tunable couplers, a widely adopted ingredient in large-scale superconducting quantum processors. Leveraging the strong frequency tunability of the couplers and stray interaction between the couplers and readout resonators, we eliminate state leakage on the couplers, thus suppressing space-correlated errors caused by population propagation among the couplers. Assisted by the couplers, we further reduce leakage to higher qubit levels with high efficiency (98.1%) and low error rate on the computational subspace (0.58%), suppressing time-correlated errors during QEC cycles. The performance of our scheme demonstrates its potential as an indispensable building block for scalable QEC with superconducting qubits.

Low-loss interconnects for modular superconducting quantum processors

  1. Jingjing Niu,
  2. Libo Zhang,
  3. Yang Liu,
  4. Jiawei Qiu,
  5. Wenhui Huang,
  6. Jiaxiang Huang,
  7. Hao Jia,
  8. Jiawei Liu,
  9. Ziyu Tao,
  10. Weiwei Wei,
  11. Yuxuan Zhou,
  12. Wanjing Zou,
  13. Yuanzhen Chen,
  14. Xiaowei Deng,
  15. Xiuhao Deng,
  16. Changkang Hu,
  17. Ling Hu,
  18. Jian Li,
  19. Dian Tan,
  20. Yuan Xu,
  21. Fei Yan,
  22. Tongxing Yan,
  23. Song Liu,
  24. Youpeng Zhong,
  25. Andrew N. Cleland,
  26. and Dapeng Yu
Scaling is now a key challenge in superconducting quantum computing. One solution is to build modular systems in which smaller-scale quantum modules are individually constructed and
calibrated, and then assembled into a larger architecture. This, however, requires the development of suitable interconnects. Here, we report low-loss interconnects based on pure aluminium coaxial cables and on-chip impedance transformers featuring quality factors up to 8.1×105, which is comparable to the performance of our transmon qubits fabricated on single-crystal sapphire substrate. We use these interconnects to link five quantum modules with inter-module quantum state transfer and Bell state fidelities up to 99\%. To benchmark the overall performance of the processor, we create maximally-entangled, multi-qubit Greenberger-Horne-Zeilinger (GHZ) states. The generated inter-module four-qubit GHZ state exhibits 92.0\% fidelity. We also entangle up to 12 qubits in a GHZ state with 55.8±1.8% fidelity, which is above the genuine multipartite entanglement threshold of 1/2. These results represent a viable modular approach for large-scale superconducting quantum processors.

Experimental Realization of Two Qutrits Gate with Tunable Coupling in Superconducting Circuits

  1. Kai Luo,
  2. Wenhui Huang,
  3. Ziyu Tao,
  4. Libo Zhang,
  5. Yuxuan Zhou,
  6. Ji Chu,
  7. Wuxin Liu,
  8. Biying Wang,
  9. Jiangyu Cui,
  10. Song Liu,
  11. Fei Yan,
  12. Man-Hong Yung,
  13. Yuanzhen Chen,
  14. Tongxing Yan,
  15. and Dapeng Yu
Gate-based quantum computation has been extensively investigated using quantum circuits based on qubits. In many cases, such qubits are actually made out of multilevel systems but with
only two states being used for computational purpose. While such a strategy has the advantage of being in line with the common binary logic, it in some sense wastes the ready-for-use resources in the large Hilbert space of these intrinsic multi-dimensional systems. Quantum computation beyond qubits (e.g., using qutrits or qudits) has thus been discussed and argued to be more efficient than its qubit counterpart in certain scenarios. However, one of the essential elements for qutrit-based quantum computation, two-qutrit quantum gate, remains a major challenge. In this work, we propose and demonstrate a highly efficient and scalable two-qutrit quantum gate in superconducting quantum circuits. Using a tunable coupler to control the cross-Kerr coupling between two qutrits, our scheme realizes a two-qutrit conditional phase gate with fidelity 89.3% by combining simple pulses applied to the coupler with single-qutrit operations. We further use such a two-qutrit gate to prepare an EPR state of two qutrits with a fidelity of 95.5%. Our scheme takes advantage of a tunable qutrit-qutrit coupling with a large on/off ratio. It therefore offers both high efficiency and low cross talk between qutrits, thus being friendly for scaling up. Our work constitutes an important step towards scalable qutrit-based quantum computation.

Simulation of Higher-Order Topological Phases and Related Topological Phase Transitions in a Superconducting Qubit

  1. Jingjing Niu,
  2. Tongxing Yan,
  3. Yuxuan Zhou,
  4. Ziyu Tao,
  5. Xiaole Li,
  6. Weiyang Liu,
  7. Libo Zhang,
  8. Song Liu,
  9. Zhongbo Yan,
  10. Yuanzhen Chen,
  11. and Dapeng Yu
Higher-order topological insulators (TIs) and superconductors (TSCs) give rise to new bulk and boundary physics, as well as new classes of topological phase transitions. While higher-order
TIs have been actively studied on many platforms, the experimental study of higher-order TSCs has thus far been greatly hindered due to the scarcity of material realizations. To advance the study of higher-order TSCs, in this work we carry out the simulation of a two-dimensional spinless second-order TSC belonging to the symmetry class D in a superconducting qubit. Owing to the great flexibility and controllability of the quantum simulator, we observe the realization of higher-order topology directly through the measurement of the pseudo-spin texture in momentum space of the bulk for the first time, in sharp contrast to previous experiments based on the detection of gapless boundary modes in real space. Also through the measurement of the evolution of pseudo-spin texture with parameters, we further observe novel topological phase transitions from the second-order TSC to the trivial superconductor, as well as to the first-order TSC with nonzero Chern number. Our work sheds new light on the study of higher-order topological phases and topological phase transitions.