Striving for higher gate fidelity is crucial not only for enhancing existing noisy intermediate-scale quantum (NISQ) devices but also for unleashing the potential of fault-tolerantquantum computation through quantum error correction. A recently proposed theoretical scheme, the double-transmon coupler (DTC), aims to achieve both suppressed residual interaction and a fast high-fidelity two-qubit gate simultaneously, particularly for highly detuned qubits. Harnessing the state-of-the-art fabrication techniques and a model-free pulse-optimization process based on reinforcement learning, we translate the theoretical DTC scheme into reality, attaining fidelities of 99.92% for a CZ gate and 99.98% for single-qubit gates. The performance of the DTC scheme demonstrates its potential as a competitive building block for superconducting quantum processors.
Tunable couplers in superconducting quantum computers have enabled fast and accurate two-qubit gates, with reported high fidelities over 0.99 in various architectures and gate implementationschemes. However, there are few tunable couplers whose performance in multi-qubit systems is clarified, except for the most widely used one: single-transmon coupler (STC). Achieving similar accuracy to isolated two-qubit systems remains challenging due to various undesirable couplings but is necessary for scalability. In this work, we numerically analyze a system of three fixed-frequency qubits coupled via two double-transmon couplers (DTCs) where nearest-neighbor qubits are highly detuned and also next nearest-neighbor ones are nearly resonant. The DTC is a recently proposed tunable coupler, which consists of two fixed-frequency transmons coupled through a common loop with an additional Josephson junction. We find that the DTC can not only reduce undesired residual couplings sufficiently, as well as in isolated two-qubits systems, but also enables implementations of 30-ns CZ gates and 10-ns π/2 pulses with fidelities of 0.9999 or higher. For comparison, we also investigate the system where the DTCs are replaced by the STCs. The results show that the DTC outperforms the STC in terms of both residual coupling suppression and gate accuracy in the above systems. From these results, we expect that the DTC architecture is promising for realizing high-performance, scalable superconducting quantum computers.
High-performance two-qubit gates have been reported with superconducting qubits coupled via a single-transmon coupler (STC). Most of them are implemented for qubits with a small detuningsince reducing residual ZZ coupling for highly detuned qubits by an STC is challenging. In terms of the frequency crowding and crosstalk, however, highly detuned qubits are desirable. Here, we numerically demonstrate a high-performance parametric gate for highly detuned fixed-frequency qubits using a recently proposed tunable coupler called a double-transmon coupler (DTC). Applying an ac flux pulse, we can perform a maximally entangling universal gate (iSWAP‾‾‾‾‾‾‾√) with an average fidelity over 99.99% and a short gate time of about 24 ns. This speed is comparable to resonance-based gates for slightly detuned tunable qubits. Moreover, using a dc flux pulse alternatively, we can achieve another kind of entangling gate called a CZ gate with an average fidelity over 99.99% and a gate time of about 18 ns. Given the frexibility and feasible settings, we can expect that the DTC will contribute to realizing a high-performance quantum computer in the near future.