Cat qubits, a type of bosonic qubit encoded in a harmonic oscillator, can exhibit an exponential noise bias against bit-flip errors with increasing mean photon number. Here, we focuson cat qubits stabilized by two-photon dissipation, where pairs of photons are added and removed from a harmonic oscillator by an auxiliary, lossy buffer mode. This process requires a large loss rate and strong nonlinearities of the buffer mode that must not degrade the coherence and linearity of the oscillator. In this work, we show how to overcome this challenge by coloring the loss environment of the buffer mode with a multi-pole filter and optimizing the circuit to take into account additional inductances in the buffer mode. Using these techniques, we achieve near-ideal enhancement of cat-qubit bit-flip times with increasing photon number, reaching over 0.1 seconds with a mean photon number of only 4. Concurrently, our cat qubit remains highly phase coherent, with phase-flip times corresponding to an effective lifetime of T1,eff≃70 μs, comparable with the bare oscillator lifetime. We achieve this performance even in the presence of an ancilla transmon, used for reading out the cat qubit states, by engineering a tunable oscillator-ancilla dispersive coupling. Furthermore, the low nonlinearity of the harmonic oscillator mode allows us to perform pulsed cat-qubit stabilization, an important control primitive, where the stabilization can remain off for a significant fraction (e.g., two thirds) of a 3 μs cycle without degrading bit-flip times. These advances are important for the realization of scalable error-correction with cat qubits, where large noise bias and low phase-flip error rate enable the use of hardware-efficient outer error-correcting codes.
Noise within solid-state systems at low temperatures, where many of the degrees of freedom of the host material are frozen out, can typically be traced back to material defects thatsupport low-energy excitations. These defects can take a wide variety of microscopic forms, and for amorphous materials are broadly described using generic models such as the tunneling two-level systems (TLS) model. Although the details of TLS, and their impact on the low-temperature behavior of materials have been studied since the 1970s, these states have recently taken on further relevance in the field of quantum computing, where the limits to the coherence of superconducting microwave quantum circuits are dominated by TLS. Efforts to mitigate the impact of TLS have thus far focused on circuit design, material selection, and material surface treatment. In this work, we take a new approach that seeks to directly modify the properties of TLS through nanoscale-engineering. This is achieved by periodically structuring the host material, forming an acoustic bandgap that suppresses all microwave-frequency phonons in a GHz-wide frequency band around the operating frequency of a transmon qubit superconducting quantum circuit. For embedded TLS that are strongly coupled to the electric qubit, we measure a pronounced increase in relaxation time by two orders of magnitude when the TLS transition frequency lies within the acoustic bandgap, with the longest T1 time exceeding 5 milliseconds. Our work paves the way for in-depth investigation and coherent control of TLS, which is essential for deepening our understanding of noise in amorphous materials and advancing solid-state quantum devices.
We present a comprehensive architectural analysis for a fault-tolerant quantum computer based on cat codes concatenated with outer quantum error-correcting codes. For the physical hardware,we propose a system of acoustic resonators coupled to superconducting circuits with a two-dimensional layout. Using estimated near-term physical parameters for electro-acoustic systems, we perform a detailed error analysis of measurements and gates, including CNOT and Toffoli gates. Having built a realistic noise model, we numerically simulate quantum error correction when the outer code is either a repetition code or a thin rectangular surface code. Our next step toward universal fault-tolerant quantum computation is a protocol for fault-tolerant Toffoli magic state preparation that significantly improves upon the fidelity of physical Toffoli gates at very low qubit cost. To achieve even lower overheads, we devise a new magic-state distillation protocol for Toffoli states. Combining these results together, we obtain realistic full-resource estimates of the physical error rates and overheads needed to run useful fault-tolerant quantum algorithms. We find that with around 1,000 superconducting circuit components, one could construct a fault-tolerant quantum computer that can run circuits which are intractable for classical supercomputers. Hardware with 32,000 superconducting circuit components, in turn, could simulate the Hubbard model in a regime beyond the reach of classical computing.