Superconducting traveling-wave parametric amplifiers (TWPAs) are increasingly used in various applications, including quantum computing, quantum sensing, and dark matter detection.However, one important characteristic of these amplifiers, gain compression, has not received much attention. As a result, there is a lack of comprehensive experimental exploration of this phenomenon in the existing literature. In this study, we present an experimental investigation of gain compression in a Josephson traveling-wave parametric amplifier based on a four-wave mixing process. We have implemented a novel setup to monitor the complex transmission of both the pump and signal tones, which allows us to simultaneously track pump depletion and signal amplification as functions of signal power and frequency across the entire bandwidth of the device. Our findings indicate that, while pump depletion occurs during gain compression, it is not the only mechanism involved in the saturation of a TWPA. Power-induced phase-matching processes also take place within the device. This study provides valuable insights for optimizing TWPAs for applications that require high total input power, such as multiplexed qubit readout or broadband photon emission.
Superconducting traveling-wave parametric amplifiers have emerged as highly promising devices for near-quantum-limited broadband amplification of microwave signals and are essentialfor high quantum-efficiency microwave readout lines. Built-in isolation, as well as gain, would address their primary limitation: lack of true directionality due to potential backward travel of electromagnetic radiation to their input port. Here, we demonstrate a Josephson-junction-based traveling-wave parametric amplifier isolator. It utilizes third-order nonlinearity for amplification and second-order nonlinearity for frequency upconversion of backward propagating modes to provide reverse isolation. These parametric processes, enhanced by a novel phase matching mechanism, exhibit gain of up to 20~dB and reverse isolation of up to 30~dB over a static 3~dB bandwidth greater than 500~MHz, while keeping near-quantum limited added noise. This demonstration of a broadband truly directional amplifier ultimately paves the way towards broadband quantum-limited microwave amplification lines without bulky magnetic isolators and with inhibited back-action.
With a large portfolio of elemental quantum components, superconducting quantum circuits have contributed to dramatic advances in microwave quantum optics. Of these elements, quantum-limitedparametric amplifiers have proven to be essential for low noise readout of quantum systems whose energy range is intrinsically low (tens of μeV ). They are also used to generate non classical states of light that can be a resource for quantum enhanced detection. Superconducting parametric amplifiers, like quantum bits, typically utilize a Josephson junction as a source of magnetically tunable and dissipation-free nonlinearity. In recent years, efforts have been made to introduce semiconductor weak links as electrically tunable nonlinear elements, with demonstrations of microwave resonators and quantum bits using semiconductor nanowires, a two dimensional electron gas, carbon nanotubes and graphene. However, given the challenge of balancing nonlinearity, dissipation, participation, and energy scale, parametric amplifiers have not yet been implemented with a semiconductor weak link. Here we demonstrate a parametric amplifier leveraging a graphene Josephson junction and show that its working frequency is widely tunable with a gate voltage. We report gain exceeding 20 dB and noise performance close to the standard quantum limit. Our results complete the toolset for electrically tunable superconducting quantum circuits and offer new opportunities for the development of quantum technologies such as quantum computing, quantum sensing and fundamental science.