Broadband parametric amplification in DARTWARS

  1. Felix Ahrens,
  2. Elena Ferri,
  3. Guerino Avallone,
  4. Carlo Barone,
  5. Matteo Borghesi,
  6. Luca Callegaro,
  7. Giovanni Carapella,
  8. Anna Paola Caricato,
  9. Iacopo Carusotto,
  10. Alessandro Cian,
  11. Alessandro D'Elia,
  12. Daniele Di Gioacchino,
  13. Emanuele Enrico,
  14. Paolo Falferi,
  15. Luca Fasolo,
  16. Marco Faverzani,
  17. Giovanni Filatrella,
  18. Claudio Gatti,
  19. Andrea Giachero,
  20. Damiano Giubertoni,
  21. Veronica Granata,
  22. Claudio Guarcello,
  23. Danilo Labranca,
  24. Angelo Leo,
  25. Carlo Ligi,
  26. Giovanni Maccarrone,
  27. Federica Mantegazzini,
  28. Benno Margesin,
  29. Giuseppe Maruccio,
  30. Renato Mezzena,
  31. Anna Grazia Monteduro,
  32. Roberto Moretti,
  33. Angelo Nucciotti,
  34. Luca Oberto,
  35. Luca Origo,
  36. Sergio Pagano,
  37. Alex Stephane Piedjou,
  38. Luca Piersanti,
  39. Alessio Rettaroli,
  40. Silvia Rizzato,
  41. Simone Tocci,
  42. Andrea Vinante,
  43. and Mario Zannoni
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This
characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (TWPAs) may be especially suitable for practical applications due to their multi-Gigahertz amplification bandwidth, a feature lacking in Josephson Parametric Amplifiers (JPAs), despite the latter being a more established technology. This paper presents recent developments of the DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project, focusing on the latest prototypes of Kinetic Inductance TWPAs (KITWPAs). The project aims to develop a KITWPA capable of achieving 20 dB of amplification. To enhance the production yield, the first prototypes were fabricated with half the length and expected gain of the final device. In this paper, we present the results of the characterization of one of the half-length prototypes. The measurements revealed an average amplification of approximately 9dB across a 2GHz bandwidth for a KITWPA spanning 17mm in length.

Development of KI-TWPAs for the DARTWARS project

  1. Felix Ahrens,
  2. Elena Ferri,
  3. Guerino Avallone,
  4. Carlo Barone,
  5. Matteo Borghesi,
  6. Luca Callegaro,
  7. Giovanni Carapella,
  8. Anna Paola Caricato,
  9. Iacopo Carusotto,
  10. Alessandro Cian,
  11. Alessandro D'Elia,
  12. Daniele Di Gioacchino,
  13. Emanuele Enrico,
  14. Paolo Falferi,
  15. Luca Fasolo,
  16. Marco Faverzani,
  17. Giovanni Filatrella,
  18. Claudio Gatti,
  19. Andrea Giachero,
  20. Damiano Giubertoni,
  21. Veronica Granata,
  22. Claudio Guarcello,
  23. Danilo Labranca,
  24. Angelo Leo,
  25. Carlo Ligi,
  26. Giovanni Maccarrone,
  27. Federica Mantegazzini,
  28. Benno Margesin,
  29. Giuseppe Maruccio,
  30. Renato Mezzena,
  31. Anna Grazia Monteduro,
  32. Roberto Moretti,
  33. Angelo Nucciotti,
  34. Luca Oberto,
  35. Luca Origo,
  36. Sergio Pagano,
  37. Alex Stephane Piedjou,
  38. Luca Piersanti,
  39. Alessio Rettaroli,
  40. Silvia Rizzato,
  41. Simone Tocci,
  42. Andrea Vinante,
  43. and Mario Zannoni
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave
Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation.

Microwave Quantum Radar using a Josephson Traveling Wave Parametric Amplifier

  1. Patrizia Livreri,
  2. Emanuele Enrico,
  3. Luca Fasolo,
  4. Angelo Greco,
  5. Alessio Rettaroli,
  6. David Vitali,
  7. Alfonso Farina,
  8. Francesco Marchetti,
  9. and Dario Giacomin
Detection of low-reflectivity objects can be improved by the so-called quantum illumination procedure. However, quantum detection probability exponentially decays with the source bandwidth.
The Josephson Parametric Amplifiers (JPAs) technology utilized as a source, generating a pair of entangled signals called two-mode squeezed vacuum states, shows a very narrow bandwidth limiting the operation of the microwave quantum radar (MQR). In this paper, for the first time, a microwave quantum radar setup based on quantum illumination protocol and using a Josephson Traveling Wave Parametric Amplifier (JTWPA) is proposed. Measurement results of the developed JTWPA, pumped at 12 GHz, show an ultrawide bandwidth equal to 10 GHz at X-band making our MQR a promising candidate for the detection of stealth objects.

Josephson Travelling Wave Parametric Amplifiers as Non-Classical Light Source for Microwave Quantum Illumination

  1. Luca Fasolo,
  2. Angelo Greco,
  3. Emanuele Enrico,
  4. Fabrizio Illuminati,
  5. Rosario Lo Franco,
  6. David Vitali,
  7. and Patrizia Livreri
Detection of low-reflectivity objects can be enriched via the so-called quantum illumination procedure. In order that this quantum procedure outperforms classical detection protocols,
entangled states of microwave radiation are initially required. In this paper, we discuss the role of Josephson Traveling Wave Parametric Amplifiers (JTWPAs), based on circuit-QED components, as suitable sources of a two-mode squeezed vacuum state, a special signal-idler entangled state. The obtained wide bandwidth makes the JTWPA an ideal candidate for generating quantum radiation in quantum metrology and information processing applications.

A quantum model for rf-SQUIDs based metamaterials enabling 3WM and 4WM Travelling Wave Parametric Amplification

  1. Angelo Greco,
  2. Luca Fasolo,
  3. Alice Meda,
  4. Luca Callegaro,
  5. and Emanuele Enrico
A quantum model for Josephson-based metamaterials working in the Three-Wave Mixing (3WM) and Four-Wave Mixing (4WM) regimes at the single photon level is presented. The transmission
line taken into account, namely Traveling Wave Josephson Parametric Amplifier (TWJPA), is a bipole composed by a chain of rf-SQUIDs which can be biased by a DC current or a magnetic field in order to activate the 3WM or 4WM nonlinearities. The model exploits a Hamiltonian approach to analytically work out the time evolution both in the Heisenberg and interaction pictures. The former returns the analytic form of the gain of the amplifier, while the latter allows to recover the probability distributions vs. time of the photonic populations, for multimodal Fock and coherent input states. The dependence of the metamaterial’s nonlinearities is presented in terms of circuit parameters in a lumped model framework while evaluating the experimental conditions effects on the model validity.

Superconducting Josephson-based metamaterials for quantum-limited parametric amplification: a review

  1. Luca Fasolo,
  2. Angelo Greco,
  3. and Emanuele Enrico
In the last few years, several groups have proposed and developed their own platforms demonstrating quantum-limited linear parametric amplification, with evident applications in quantum
information and computation, electrical and optical metrology, radio astronomy and basic physics concerning axion detection. Here we propose a short review on the physics behind parametric amplification via metamaterials composed by coplanar wave-guides embedding several Josephson junctions. We present and compare different schemes that exploit the nonlinearity of the Josephson current-phase relation to mix the so-called signal, idler and pump tones. The chapter then presents and compares three different theoretical models, developed in the last few years, to predict the dynamics of these nonlinear systems in the particular case of a 4-Wave Mixing process and under the degenerate undepleted pump assumption. We will demonstrate that, under the same assumption, all the results are comparable in terms of amplification of the output fields.