A bismuth-doped silicon substrate was analyzed by using a magnetometer based on a superconducting flux qubit. The temperature dependence of the magnetization indicates that the siliconsubstrate contains at least two signal sources, intentionally doped bismuth spins and a spin 1/2 system with a ratio of 0.873 to 0.127. In combination with a conventional electron spin resonance spectrometer, a candidate origin of the spin 1/2 system was identified as a dangling bond on the silicon surface. In addition, the spin sensitivity of the magnetometer was also estimated to be 12 spins/Hz‾‾‾√ by using optimized dispersive readout.
The operation of a conventional superconducting flux qubit requires the application of a precisely tuned magnetic field to set the operation point at half a flux quantum through thequbit loop, which makes the scaling of quantum circuits based on this type of qubits difficult. It has been proposed that, by inducing a pi phase shift in the superconducting order parameter using a precisely controlled nanoscale-thickness superconductor/ferromagnet/superconductor Josephson junction, commonly referred to as pi-junction, it is possible to realize a flux qubit operating at zero magnetic flux. We report the realization of a zero-flux-biased flux qubit based on three NbN/AlN/NbN Josephson junctions and a NbN/PdNi/NbN ferromagnetic pi-junction. The qubit lifetime is in the microsecond range, which we argue is limited by quasiparticle excitations in the metallic ferromagnet layer. With further improvements in the materials of the ferromagnetic junction, the zero-flux-biased flux qubits can become a promising platform for quantum computing.
Parasitic two-level-system (TLS) defects are one of the major factors limiting the coherence times of superconducting qubits. Although there has been significant progress in characterizingbasic parameters of TLS defects, exact mechanisms of interactions between a qubit and various types of TLS defects remained largely unexplored due to the lack of experimental techniques able to probe the form of qubit-defect couplings. Here we present an experimental method of TLS defect spectroscopy using a strong qubit drive that allowed us to distinguish between various types of qubit-defect interactions. By applying this method to a capacitively shunted flux qubit, we detected a rare type of TLS defects with a nonlinear qubit-defect coupling due to critical-current fluctuations, as well as conventional TLS defects with a linear coupling to the qubit caused by charge fluctuations. The presented approach could become the routine method for high-frequency defect inspection and quality control in superconducting qubit fabrication, providing essential feedback for fabrication process optimization. The reported method is a powerful tool to uniquely identify the type of noise fluctuations caused by TLS defects, enabling the development of realistic noise models relevant to fault-tolerant quantum control.
We report the experimental realization of a 3D capacitively-shunt superconducting flux qubit with long coherence times. At the optimal flux bias point, the qubit demonstrates energyrelaxation times in the 60-90 μs range, and Hahn-echo coherence time of about 80 μs which can be further improved by dynamical decoupling. Qubit energy relaxation can be attributed to quasiparticle tunneling, while qubit dephasing is caused by flux noise away from the optimal point. Our results show that 3D c-shunt flux qubits demonstrate improved performance over other types of flux qubits which is advantageous for applications such as quantum magnetometry and spin sensing.