Superconducting transmon qubits have established as a leading candidate for quantum computation, as well as a flexible platform for exploring exotic quantum phases and dynamics. However,physical coupling naturally yields isotropic transverse interactions between qubits, restricting their access to diverse quantum phases that require spatially dependent interactions. Here, we demonstrate the simultaneous realization of both pairing (XX-YY) and hopping (XX+YY) interactions between transmon qubits by Floquet engineering. The coherent superposition of these interactions enables independent control over the XX and YY terms, yielding anisotropic transverse interactions. By aligning the transverse interactions along a 1D chain of six qubits, as calibrated via Aharonov-Bohm interference in synthetic space, we synthesize a transverse field Ising chain model and explore its dynamical phase transition under varying external field. The scalable synthesis of anisotropic transverse interactions paves the way for the implementation of more complex physical systems requiring spatially dependent interactions, enriching the toolbox for engineering quantum phases with superconducting qubits.
Mixers play a crucial role in superconducting quantum computing, primarily by facilitating frequency conversion of signals to enable precise control and readout of quantum states. However,imperfections, particularly carrier leakage and unwanted sideband signal, can significantly compromise control fidelity. To mitigate these defects, regular and precise mixer calibrations are indispensable, yet they pose a formidable challenge in large-scale quantum control. Here, we introduce an in situ calibration technique and outcome-focused mixer calibration scheme using superconducting qubits. Our method leverages the qubit’s response to imperfect signals, allowing for calibration without modifying the wiring configuration. We experimentally validate the efficacy of this technique by benchmarking single-qubit gate fidelity and qubit coherence time.
As superconducting quantum computing continues to advance at an unprecedented pace, there is a compelling demand for the innovation of specialized electronic instruments that act ascrucial conduits between quantum processors and host computers. Here, we introduce a Microwave Measurement and Control System (M2CS) dedicated for large-scale superconducting quantum processors. M2CS features a compact modular design that balances overall performance, scalability, and flexibility. Electronic tests of M2CS show key metrics comparable to commercial instruments. Benchmark tests on transmon superconducting qubits further show qubit coherence and gate fidelities comparable to state-of-the-art results, confirming M2CS’s capability to meet the stringent requirements of quantum experiments run on intermediate-scale quantum processors. The system’s compact and scalable design offers significant room for further enhancements that could accommodate the measurement and control requirements of over 1000 qubits, and can also be adopted to other quantum computing platforms such as trapped ions and silicon quantum dots. The M2CS architecture may also be applied to wider range of scenarios, such as microwave kinetic inductance detectors, as well as phased array radar systems.
Generation and preservation of quantum entanglement are among the primary tasks in quantum information processing. State stabilization via quantum bath engineering offers a resource-efficientapproach to achieve this objective. However, current methods for engineering dissipative channels to stabilize target entangled states often require specialized hardware designs, complicating experimental realization and hindering their compatibility with scalable quantum computation architectures. In this work, we propose and experimentally demonstrate a stabilization protocol readily implementable in the mainstream integrated superconducting quantum circuits. The approach utilizes a Raman process involving a resonant (or nearly resonant) superconducting qubit array and their dedicated readout resonators to effectively emerge nonlocal dissipative channels. Leveraging individual controllability of the qubits and resonators, the protocol stabilizes two-qubit Bell states with a fidelity of 90.7%, marking the highest reported value in solid-state platforms to date. Furthermore, by extending this strategy to include three qubits, an entangled W state is achieved with a fidelity of 86.2%, which has not been experimentally investigated before. Notably, the protocol is of practical interest since it only utilizes existing hardware common to standard operations in the underlying superconducting circuits, thereby facilitating the exploration of many-body quantum entanglement with dissipative resources.
Random fluctuations can lead to cooperative effects in complex systems. We here report the experimental observation of noise-induced quantum synchronization in a chain of superconductingtransmon qubits with nearest-neighbor interactions. The application of Gaussian white noise to a single site leads to synchronous oscillations in the entire chain. We show that the two synchronized end qubits are entangled, with nonzero concurrence, and that they belong to a class of generalized Bell states known as maximally entangled mixed states, whose entanglement cannot be increased by any global unitary. We further demonstrate the stability against frequency detuning of both synchronization and entanglement by determining the corresponding generalized Arnold tongue diagrams. Our results highlight the constructive influence of noise in a quantum many-body system and uncover the potential role of synchronization for mixed-state quantum information science.
Superconducting qubits are a promising platform for building fault-tolerant quantum computers, with recent achievement showing the suppression of logical error with increasing codesize. However, leakage into non-computational states, a common issue in practical quantum systems including superconducting circuits, introduces correlated errors that undermine QEC scalability. Here, we propose and demonstrate a leakage reduction scheme utilizing tunable couplers, a widely adopted ingredient in large-scale superconducting quantum processors. Leveraging the strong frequency tunability of the couplers and stray interaction between the couplers and readout resonators, we eliminate state leakage on the couplers, thus suppressing space-correlated errors caused by population propagation among the couplers. Assisted by the couplers, we further reduce leakage to higher qubit levels with high efficiency (98.1%) and low error rate on the computational subspace (0.58%), suppressing time-correlated errors during QEC cycles. The performance of our scheme demonstrates its potential as an indispensable building block for scalable QEC with superconducting qubits.
Quantum teleportation~cite{Bennett1993} is of both fundamental interest and great practical importance in quantum information science. To date, quantum teleportation has been implementedin various physical systems~\cite{Pirandola2015}, among which superconducting qubits are of particular practical significance as they emerge as a leading system to realize large-scale quantum computation~\cite{Arute2019,Wu2021}. Nevertheless, the number of superconducting qubits on the same chip is severely limited by the available chip size, the cooling power, and the wiring complexity. Realization of quantum teleportation and remote computation over qubits on distant superconducting chips is a key quantum communication technology to scaling up the system through a distributed quantum computational network~\cite{Gottesman1999,Eisert2000,Jiang2007,Kimble2008,Monroe2014}. However, this goal has not been realized yet in experiments due to the technical challenge of making a quantum interconnect between distant superconducting chips and the inefficient transfer of flying microwave photons over the lossy interconnects~\cite{Kurpiers2018,Axline2018,Campagne2018,Magnard2020}. Here we demonstrate deterministic teleportation of quantum states and entangling gates between distant superconducting chips connected by a 64-meter-long cable bus featuring an ultralow loss of 0.32~dB/km at cryogenic temperatures, where high fidelity remote entanglement is generated via flying microwave photons utilizing time-reversal-symmetry~\cite{Cirac1997,Korotkov2011}. Apart from the fundamental interest of teleporting macroscopic superconducting qubits over a long distance, our work lays a foundation to realization of large-scale superconducting quantum computation through a distributed computational network~\cite{Gottesman1999,Eisert2000,Jiang2007,Kimble2008,Monroe2014}.
Scaling is now a key challenge in superconducting quantum computing. One solution is to build modular systems in which smaller-scale quantum modules are individually constructed andcalibrated, and then assembled into a larger architecture. This, however, requires the development of suitable interconnects. Here, we report low-loss interconnects based on pure aluminium coaxial cables and on-chip impedance transformers featuring quality factors up to 8.1×105, which is comparable to the performance of our transmon qubits fabricated on single-crystal sapphire substrate. We use these interconnects to link five quantum modules with inter-module quantum state transfer and Bell state fidelities up to 99\%. To benchmark the overall performance of the processor, we create maximally-entangled, multi-qubit Greenberger-Horne-Zeilinger (GHZ) states. The generated inter-module four-qubit GHZ state exhibits 92.0\% fidelity. We also entangle up to 12 qubits in a GHZ state with 55.8±1.8% fidelity, which is above the genuine multipartite entanglement threshold of 1/2. These results represent a viable modular approach for large-scale superconducting quantum processors.
Gate-based quantum computation has been extensively investigated using quantum circuits based on qubits. In many cases, such qubits are actually made out of multilevel systems but withonly two states being used for computational purpose. While such a strategy has the advantage of being in line with the common binary logic, it in some sense wastes the ready-for-use resources in the large Hilbert space of these intrinsic multi-dimensional systems. Quantum computation beyond qubits (e.g., using qutrits or qudits) has thus been discussed and argued to be more efficient than its qubit counterpart in certain scenarios. However, one of the essential elements for qutrit-based quantum computation, two-qutrit quantum gate, remains a major challenge. In this work, we propose and demonstrate a highly efficient and scalable two-qutrit quantum gate in superconducting quantum circuits. Using a tunable coupler to control the cross-Kerr coupling between two qutrits, our scheme realizes a two-qutrit conditional phase gate with fidelity 89.3% by combining simple pulses applied to the coupler with single-qutrit operations. We further use such a two-qutrit gate to prepare an EPR state of two qutrits with a fidelity of 95.5%. Our scheme takes advantage of a tunable qutrit-qutrit coupling with a large on/off ratio. It therefore offers both high efficiency and low cross talk between qutrits, thus being friendly for scaling up. Our work constitutes an important step towards scalable qutrit-based quantum computation.
Controlling the flow of quantum information is a fundamental task for quantum computers, which is unpractical to realize on classical devices. Coherent devices which can process quantumstates are thus required to route the quantum states yielding the information. In this paper we demonstrate experimentally the smallest quantum transistor for superconducting processors, composed of collector and emitter qubits, and the coupler. The interaction strength between the collector and emitter is controlled by tuning the frequency and the state of the gate qubit, effectively implementing a quantum switch. From the truth-table measurement (open-gate fidelity 93.38%, closed-gate fidelity 98.77%), we verify the high performance of the quantum transistor. We also show that taking into account the third energy level of the qubits is critical to achieving a high-fidelity transistor. The presented device has a strong potential for quantum information processes in superconducting platforms.