Nonlinear microwave circuits are key elements for many groundbreaking research directions and technologies, such as quantum computation and quantum sensing. The majority of microwavecircuits with Josephson nonlinearities to date is based on aluminum thin films, and therefore they are severely restricted in their operation range regarding temperatures and external magnetic fields. Here, we present the realization of superconducting niobium microwave resonators with integrated, three-dimensional (3D) nanobridge-based superconducting quantum interference devices. The 3D nanobridges (constriction weak links) are monolithically patterned into pre-fabricated microwave LC circuits using neon ion beam milling, and the resulting quantum interference circuits show frequency tunabilities, flux responsivities and Kerr nonlinearities on par with comparable aluminum nanobridge devices, but with the perspective of a much larger operation parameter regime. Our results reveal great potential for application of these circuits in hybrid systems with e.g. magnons and spin ensembles or in flux-mediated optomechanics.
Harmonic oscillators belong to the most fundamental concepts in physics and are central to many current research fields such as circuit QED, cavity optomechanics and photon-pressuresystems. Here, we engineer an effective negative mass harmonic oscillator mode in a superconducting microwave LC circuit and couple it via photon-pressure to a second low-frequency circuit. We demonstrate that the effective negative mass leads to an inversion of dynamical backaction and to sideband-cooling of the low-frequency circuit by a blue-detuned pump field, naturally explained by the inverted energy ladder of the negative mass oscillator.
Nonlinear damping, a force of friction that depends on the amplitude of motion, plays an important role in many electrical, mechanical and even biological oscillators. In novel technologiessuch as carbon nanotubes, graphene membranes or superconducting resonators, the origin of nonlinear damping is sometimes unclear. This presents a problem, as the damping rate is a key figure of merit in the application of these systems to extremely precise sensors or quantum computers. Through measurements of a superconducting circuit, we show that nonlinear damping can emerge as a direct consequence of quantum fluctuations and the conservative nonlinearity of a Josephson junction. The phenomenon can be understood and visualized through the flow of quasi-probability in phase space, and accurately describes our experimental observations. Crucially, the effect is not restricted to superconducting circuits: we expect that quantum fluctuations or other sources of noise give rise to nonlinear damping in other systems with a similar conservative nonlinearity, such as nano-mechanical oscillators or even macroscopic systems.
We present the design, measurement and analysis of a current sensor based on a process of Josephson parametric upconversion in a superconducting microwave cavity. Terminating a coplanarwaveguide with a nanobridge constriction Josephson junction, we observe modulation sidebands from the cavity that enable highly sensitive, frequency-multiplexed output of small currents for applications such as transition-edge sensor array readout. We derive an analytical model to reproduce the measurements over a wide range of bias currents, detunings and input powers. Tuning the frequency of the cavity by more than \SI{100}{\mega\hertz} with DC current, our device achieves a minimum current sensitivity of \SI{8.9}{\pico\ampere\per\sqrt{\hertz}}. Extrapolating the results of our analytical model, we predict an improved device based on our platform, capable of achieving sensitivities down to \SI{50}{\femto\ampere\per\sqrt{\hertz}}}, or even lower if one could take advantage of parametric amplification in the Josephson cavity. Taking advantage of the Josephson architecture, our approach can provide higher sensitivity than kinetic inductance designs, and potentially enables detection of currents ultimately limited by quantum noise.
We have fabricated and investigated a stacked two-chip device, consisting of a lumped element resonator on one chip, which is side-coupled to a coplanar waveguide transmission lineon a second chip. We present a full model to predict the behavior of the device dependent on the position of the lumped element resonator with respect to the transmission line. We identify different regimes, in which the device can be operated. One of them can be used to tune the coupling between the two subsystems. Another regime enables frequency tunability of the device, without leaving the over-coupled limit for internal quality factors of about 10^4, while in the last regime the resonator properties are insensitive against small variations of the position. Finally, we have measured the transmission characteristics of the resonator for different positions, demonstrating a good agreement with the model.
When a two level system (TLS) is coupled to an electromagnetic resonator, its transition frequency changes in response to the quantum vacuum fluctuations of the electromagnetic field,a phenomenon known as the Lamb shift. Remarkably, by replacing the TLS by a harmonic oscillator, normal mode splitting leads to a similar shift, despite its completely classical origin. In a weakly-anharmonic system, lying in between the harmonic oscillator and a TLS, the origins of such shifts can be unclear. An example of such a system is the transmon qubit in a typical circuit quantum electrodynamics setting. Although often referred to as a Lamb shift, it cannot originate purely from vacuum fluctuations since in the limit of zero anharmonicity, the system becomes classical. Here, we treat normal-mode splitting separately from quantum effects in the Hamiltonian of a weakly-anharmonic system, providing a framework for understanding the extent to which the frequency shift can be attributed to quantum fluctuations.
We experimentally investigate superconducting coplanar waveguide resonators in external magnetic fields and present two strategies to reduce field-induced dissipation channels and resonancefrequency shifts. One of our approaches is to significantly reduce the superconducting ground-plane areas, which leads to reduced magnetic field-focussing and thus to lower effective magnetic fields inside the waveguide cavity. By this measure, the field-induced losses can be reduced by more than one order of magnitude in mT out-of-plane magnetic fields. When these resonators are additionally coupled inductively instead of capacitively to the microwave feedlines, an intrinsic closed superconducting loop is effectively shielding the heart of the resonator from magnetic fields by means of flux conservation. In total, we achieve a reduction of the field-induced resonance frequency shift by up to two orders of magnitude. We combine systematic parameter variations on the experimental side with numerical magnetic field calculations to explain the effects of our approaches and to support our conclusions. The presented results are relevant for all areas, where high-performance superconducting resonators need to be operated in magnetic fields, e.g. for quantum hybrid devices with superconducting circuits or electron spin resonance detectors based on coplanar waveguide cavities.
With the introduction of superconducting circuits into the field of quantum optics, many novel experimental demonstrations of the quantum physics of an artificial atom coupled to asingle-mode light field have been realized. Engineering such quantum systems offers the opportunity to explore extreme regimes of light-matter interaction that are inaccessible with natural systems. For instance the coupling strength g can be increased until it is comparable with the atomic or mode frequency ωa,m and the atom can be coupled to multiple modes which has always challenged our understanding of light-matter interaction. Here, we experimentally realize the first Transmon qubit in the ultra-strong coupling regime, reaching coupling ratios of g/ωm=0.19 and we measure multi-mode interactions through a hybridization of the qubit up to the fifth mode of the resonator. This is enabled by a qubit with 88% of its capacitance formed by a vacuum-gap capacitance with the center conductor of a coplanar waveguide resonator. In addition to potential applications in quantum information technologies due to its small size and localization of electric fields in vacuum, this new architecture offers the potential to further explore the novel regime of multi-mode ultra-strong coupling.
In this experiment, we couple a superconducting Transmon qubit to a high-impedance 645 Ω microwave resonator. Doing so leads to a large qubit-resonator coupling rate g, measured througha large vacuum Rabi splitting of 2g≃910 MHz. The coupling is a significant fraction of the qubit and resonator oscillation frequencies ω, placing our system close to the ultra-strong coupling regime (g¯=g/ω=0.071 on resonance). Combining this setup with a vacuum-gap Transmon architecture shows the potential of reaching deep into the ultra-strong coupling g¯∼0.45 with Transmon qubits.
Circuit quantum electrodynamics studies the interaction of artificial atoms and electromagnetic modes constructed from superconducting circuitry. While the theory of an atom coupledto one mode of a resonator is well studied, considering multiple modes leads to divergences which are not well understood. Here, we introduce a full quantum model of a multi-mode resonator coupled to a Josephson junction atom. Using circuit quantization, we find a Hamiltonian in which parameters of the atom are naturally renormalized as additional modes are considered. In our model, we circumvent the divergence problem, and its formulation reveals a physical understanding of the mechanisms of convergence in ubiquitous models in circuit quantum electrodynamics.