Emergence of nonlinear friction from quantum fluctuations

  1. Mario F. Gely,
  2. Adrián Sanz Mora,
  3. Shun Yanai,
  4. Rik van der Spek,
  5. Daniel Bothner,
  6. and Gary A. Steele
Nonlinear damping, a force of friction that depends on the amplitude of motion, plays an important role in many electrical, mechanical and even biological oscillators. In novel technologies
such as carbon nanotubes, graphene membranes or superconducting resonators, the origin of nonlinear damping is sometimes unclear. This presents a problem, as the damping rate is a key figure of merit in the application of these systems to extremely precise sensors or quantum computers. Through measurements of a superconducting circuit, we show that nonlinear damping can emerge as a direct consequence of quantum fluctuations and the conservative nonlinearity of a Josephson junction. The phenomenon can be understood and visualized through the flow of quasi-probability in phase space, and accurately describes our experimental observations. Crucially, the effect is not restricted to superconducting circuits: we expect that quantum fluctuations or other sources of noise give rise to nonlinear damping in other systems with a similar conservative nonlinearity, such as nano-mechanical oscillators or even macroscopic systems.

Phonon-number resolution of voltage-biased mechanical oscillators with weakly-anharmonic superconducting circuits

  1. Mario F. Gely,
  2. and Gary A. Steele
Observing quantum phenomena in macroscopic objects, and the potential discovery of a fundamental limit in the applicability of quantum mechanics, has been a central topic of modern
experimental physics. Highly coherent and heavy micro-mechanical oscillators controlled by superconducting circuits are a promising system for this task. Here, we focus in particular on the electrostatic coupling of motion to a weakly anharmonic circuit, namely the transmon qubit. In the case of a megahertz mechanical oscillator coupled to a gigahertz transmon, we explain the difficulties in bridging the large electro-mechanical frequency gap. To remedy this issue, we explore the requirements to reach phonon-number resolution in the resonant coupling of a megahertz transmon and a mechanical oscillator.

Current detection using a Josephson parametric upconverter

  1. Felix E. Schmidt,
  2. Daniel Bothner,
  3. Ines C. Rodrigues,
  4. Mario F. Gely,
  5. Mark D. Jenkins,
  6. and Gary A. Steele
We present the design, measurement and analysis of a current sensor based on a process of Josephson parametric upconversion in a superconducting microwave cavity. Terminating a coplanar
waveguide with a nanobridge constriction Josephson junction, we observe modulation sidebands from the cavity that enable highly sensitive, frequency-multiplexed output of small currents for applications such as transition-edge sensor array readout. We derive an analytical model to reproduce the measurements over a wide range of bias currents, detunings and input powers. Tuning the frequency of the cavity by more than \SI{100}{\mega\hertz} with DC current, our device achieves a minimum current sensitivity of \SI{8.9}{\pico\ampere\per\sqrt{\hertz}}. Extrapolating the results of our analytical model, we predict an improved device based on our platform, capable of achieving sensitivities down to \SI{50}{\femto\ampere\per\sqrt{\hertz}}}, or even lower if one could take advantage of parametric amplification in the Josephson cavity. Taking advantage of the Josephson architecture, our approach can provide higher sensitivity than kinetic inductance designs, and potentially enables detection of currents ultimately limited by quantum noise.

QuCAT: Quantum Circuit Analyzer Tool in Python

  1. Mario F. Gely,
  2. and Gary A. Steele
Quantum circuits constructed from Josephson junctions and superconducting electronics are key to many quantum computing and quantum optics applications. Designing these circuits involves
calculating the Hamiltonian describing their quantum behavior. Here we present QuCAT, or „Quantum Circuit Analyzer Tool“, an open-source framework to help in this task. This open-source Python library features an intuitive graphical or programmatical interface to create circuits, the ability to compute their Hamiltonian, and a set of complimentary functionalities such as calculating dissipation rates or visualizing current flow in the circuit.

Observation and stabilization of photonic Fock states in a hot radio-frequency resonator

  1. Mario F. Gely,
  2. Marios Kounalakis,
  3. Christian Dickel,
  4. Jacob Dalle,
  5. Rémy Vatré,
  6. Brian Baker,
  7. Mark D. Jenkins,
  8. and Gary A. Steele
Detecting weak radio-frequency electromagnetic fields plays a crucial role in wide range of fields, from radio astronomy to nuclear magnetic resonance imaging. In quantum mechanics,
the ultimate limit of a weak field is a single-photon. Detecting and manipulating single-photons at megahertz frequencies presents a challenge as, even at cryogenic temperatures, thermal fluctuations are significant. Here, we use a gigahertz superconducting qubit to directly observe the quantization of a megahertz radio-frequency electromagnetic field. Using the qubit, we achieve quantum control over thermal photons, cooling to the ground-state and stabilizing photonic Fock states. Releasing the resonator from our control, we directly observe its re-thermalization dynamics with the bath with nanosecond resolution. Extending circuit quantum electrodynamics to a new regime, we enable the exploration of thermodynamics at the quantum scale and allow interfacing quantum circuits with megahertz systems such as spin systems or macroscopic mechanical oscillators.

The nature of the Lamb shift in weakly-anharmonic atoms: from normal mode splitting to quantum fluctuations

  1. Mario F. Gely,
  2. Gary A. Steele,
  3. and Daniel Bothner
When a two level system (TLS) is coupled to an electromagnetic resonator, its transition frequency changes in response to the quantum vacuum fluctuations of the electromagnetic field,
a phenomenon known as the Lamb shift. Remarkably, by replacing the TLS by a harmonic oscillator, normal mode splitting leads to a similar shift, despite its completely classical origin. In a weakly-anharmonic system, lying in between the harmonic oscillator and a TLS, the origins of such shifts can be unclear. An example of such a system is the transmon qubit in a typical circuit quantum electrodynamics setting. Although often referred to as a Lamb shift, it cannot originate purely from vacuum fluctuations since in the limit of zero anharmonicity, the system becomes classical. Here, we treat normal-mode splitting separately from quantum effects in the Hamiltonian of a weakly-anharmonic system, providing a framework for understanding the extent to which the frequency shift can be attributed to quantum fluctuations.

Multi-mode ultra-strong coupling in circuit quantum electrodynamics

  1. Sal J. Bosman,
  2. Mario F. Gely,
  3. Vibhor Singh,
  4. Alessandro Bruno,
  5. Daniel Bothner,
  6. and Gary A. Steele
With the introduction of superconducting circuits into the field of quantum optics, many novel experimental demonstrations of the quantum physics of an artificial atom coupled to a
single-mode light field have been realized. Engineering such quantum systems offers the opportunity to explore extreme regimes of light-matter interaction that are inaccessible with natural systems. For instance the coupling strength g can be increased until it is comparable with the atomic or mode frequency ωa,m and the atom can be coupled to multiple modes which has always challenged our understanding of light-matter interaction. Here, we experimentally realize the first Transmon qubit in the ultra-strong coupling regime, reaching coupling ratios of g/ωm=0.19 and we measure multi-mode interactions through a hybridization of the qubit up to the fifth mode of the resonator. This is enabled by a qubit with 88% of its capacitance formed by a vacuum-gap capacitance with the center conductor of a coplanar waveguide resonator. In addition to potential applications in quantum information technologies due to its small size and localization of electric fields in vacuum, this new architecture offers the potential to further explore the novel regime of multi-mode ultra-strong coupling.

Approaching ultra-strong coupling in Transmon circuit-QED using a high-impedance resonator

  1. Sal J. Bosman,
  2. Mario F. Gely,
  3. Vibhor Singh,
  4. Daniel Bothner,
  5. Andres Castellanos-Gomez,
  6. and Gary A. Steele
In this experiment, we couple a superconducting Transmon qubit to a high-impedance 645 Ω microwave resonator. Doing so leads to a large qubit-resonator coupling rate g, measured through
a large vacuum Rabi splitting of 2g≃910 MHz. The coupling is a significant fraction of the qubit and resonator oscillation frequencies ω, placing our system close to the ultra-strong coupling regime (g¯=g/ω=0.071 on resonance). Combining this setup with a vacuum-gap Transmon architecture shows the potential of reaching deep into the ultra-strong coupling g¯∼0.45 with Transmon qubits.

Divergence-free multi-mode circuit quantum electrodynamics

  1. Mario F. Gely,
  2. Adrian Parra-Rodriguez,
  3. Daniel Bothner,
  4. Ya. M. Blanter,
  5. Sal J. Bosman,
  6. Enrique Solano,
  7. and Gary A. Steele
Circuit quantum electrodynamics studies the interaction of artificial atoms and electromagnetic modes constructed from superconducting circuitry. While the theory of an atom coupled
to one mode of a resonator is well studied, considering multiple modes leads to divergences which are not well understood. Here, we introduce a full quantum model of a multi-mode resonator coupled to a Josephson junction atom. Using circuit quantization, we find a Hamiltonian in which parameters of the atom are naturally renormalized as additional modes are considered. In our model, we circumvent the divergence problem, and its formulation reveals a physical understanding of the mechanisms of convergence in ubiquitous models in circuit quantum electrodynamics.