Quantum gates based on geometric phases possess intrinsic noise-resilience features and therefore attract much attention. However, the implementations of previous geometric quantumcomputation typically require a long pulse time of gates. As a result, their experimental control inevitably suffers from the cumulative disturbances of systematic errors due to excessive time consumption. Here, we experimentally implement a set of noncyclic and nonadiabatic geometric quantum gates in a superconducting circuit, which greatly shortens the gate time. And also, we experimentally verify that our universal single-qubit geometric gates are more robust to both the Rabi frequency error and qubit frequency shift-induced error, compared to the conventional dynamical gates, by using the randomized benchmarking method. Moreover, this scheme can be utilized to construct two-qubit geometric operations, while the generation of the maximally entangled Bell states is demonstrated. Therefore, our results provide a promising routine to achieve fast, high-fidelity, and error-resilient quantum gates in superconducting quantum circuits.
We propose an efficient scheme to implement a multiplex-controlled phase gate with multiple photonic qubits simultaneously controlling one target photonic qubit based on circuit quantumelectrodynamics (QED). For convenience, we denote this multiqubit gate as MCP gate. The gate is realized by using a two-level coupler to couple multiple cavities. The coupler here is a superconducting qubit. This scheme is simple because the gate implementation requires only \textit{one step} of operation. In addition, this scheme is quite general because the two logic states of each photonic qubit can be encoded with a vacuum state and an arbitrary non-vacuum state (e.g., a Fock state, a superposition of Fock states, a cat state, or a coherent state, etc.) which is orthogonal or quasi-orthogonal to the vacuum state. The scheme has some additional advantages: Because only two levels of the coupler are used, i.e., no auxiliary levels are utilized, decoherence from higher energy levels of the coupler is avoided; the gate operation time does not depend on the number of qubits; and the gate is implemented deterministically because no measurement is applied. As an example, we numerically analyze the circuit-QED based experimental feasibility of implementing a three-qubit MCP gate with photonic qubits each encoded via a vacuum state and a cat state. The scheme can be applied to accomplish the same task in a wide range of physical system, which consists of multiple microwave or optical cavities coupled to a two-level coupler such as a natural or artificial atom.
We propose a method for transferring quantum entangled states of two photonic cat-state qubits (cqubits) from two microwave cavities to the other two microwave cavities. This proposalis realized by using four microwave cavities coupled to a superconducting flux qutrit. Because of using four cavities with different frequencies, the inter-cavity crosstalk is significantly reduced. Since only one coupler qutrit is used, the circuit resources is minimized. The entanglement transfer is completed with a single-step operation only, thus this proposal is quite simple. The third energy level of the coupler qutrit is not populated during the state transfer, therefore decoherence from the higher energy level is greatly suppressed. Our numerical simulations show that high-fidelity transfer of two-cqubit entangled states from two transmission line resonators to the other two transmission line resonators is feasible with current circuit QED technology. This proposal is universal and can be applied to accomplish the same task in a wide range of physical systems, such as four microwave or optical cavities, which are coupled to a natural or artificial three-level atom.
Hybrid qubits have recently drawn intensive attention in quantum computing. We here propose a method to implement a universal controlled-phase gate of two hybrid qubits via two three-dimensional(3D) microwave cavities coupled to a superconducting flux qutrit. For the gate considered here, the control qubit is a microwave photonic qubit (particle-like qubit), whose two logic states are encoded by the vacuum state and the single-photon state of a cavity, while the target qubit is a cat-state qubit (wave-like qubit), whose two logic states are encoded by the two orthogonal cat states of the other cavity. During the gate operation, the qutrit remains in the ground state; therefore decoherence from the qutrit is greatly suppressed. The gate realization is quite simple, because only a single basic operation is employed and neither classical pulse nor measurement is used. Our numerical simulations demonstrate that with current circuit QED technology, this gate can be realized with a high fidelity. The generality of this proposal allows to implement the proposed gate in a wide range of physical systems, such as two 1D or 3D microwave or optical cavities coupled to a natural or artificial three-level atom. Finally, this proposal can be applied to create a novel entangled state between a particle-like photonic qubit and a wave-like cat-state qubit.
We propose a single-step implementation of a muti-target-qubit controlled phase gate with one cat-state qubit ( extit{cqubit}) simultaneously controlling n−1 target extit{cqubits}.The two logic states of a \textit{cqubit} are represented by two orthogonal cat states of a single cavity mode. In this proposal, the gate is implemented with n microwave cavities coupled to a superconducting transmon qutrit. Because the qutrit remains in the ground state during the gate operation, decoherence caused due to the qutrit’s energy relaxation and dephasing is greatly suppressed. The gate implementation is quite simple because only a single-step operation is needed and neither classical pulse nor measurement is required. Numerical simulations demonstrate that high-fidelity realization of a controlled phase gate with one cqubit simultaneously controlling two target cqubits is feasible with present circuit QED technology. This proposal can be extended to a wide range of physical systems to realize the proposed gate, such as multiple microwave or optical cavities coupled to a natural or artificial three-level atom.
We present a novel method to realize a multi-target-qubit controlled phase gate with one microwave photonic qubit simultaneously controlling n−1 target microwave photonic qubits.This gate is implemented with n microwave cavities coupled to a superconducting flux qutrit. Each cavity hosts a microwave photonic qubit, whose two logic states are represented by the vacuum state and the single photon state of a single cavity mode, respectively. During the gate operation, the qutrit remains in the ground state and thus decoherence from the qutrit is greatly suppressed. This proposal requires only a single-step operation and thus the gate implementation is quite simple. The gate operation time is independent of the number of the qubits. In addition, this proposal does not need applying classical pulse or any measurement. Numerical simulations demonstrate that high-fidelity realization of a controlled phase gate with one microwave photonic qubit simultaneously controlling two target microwave photonic qubits is feasible with current circuit QED technology. The proposal is quite general and can be applied to implement the proposed gate in a wide range of physical systems, such as multiple microwave or optical cavities coupled to a natural or artificial Λ-type three-level atom.
Cat-state qubits (qubits encoded with cat states) have recently drawn intensive attention due to their long lifetimes. We here propose a method to implement a universal controlled-phasegate of two cat-state qubits, via two microwave resonators coupled to a superconducting transmon qutrit. During the gate operation, the qutrit remains in the ground state; thus decoherence from the qutrit is greatly suppressed. This proposal requires only two basic operations and neither classical pulse nor measurement is needed; therefore the gate realization is simple. Numerical simulations show that high-fidelity implementation of this gate is feasible with current circuit QED technology. The proposal is quite general and can be applied to implement the proposed gate with two microwave resonators or two optical cavities coupled to a single three-level natural or artificial atom.
A qudit (d-level quantum systems) has a large Hilbert space and thus can be used to achieve many quantum information and communication tasks. Here, we propose a method to transfer arbitraryd-dimensional quantum states (known or unknown) between two superconducting qudits coupled to a single cavity. The state transfer can be performed fast because of employing resonant interactions only. In addition, quantum states can be deterministically transferred without measurement. Numerical simulations show that high-fidelity transfer of quantum states between two superconducting transmon qudits (d≤5) is feasible with current circuit QED technology. This proposal is quite general and can be applied to accomplish the same task with various superconducting qudits, quantum dots, or natural atoms coupled to a cavity or resonator.