Optimizing quantum gates towards the scale of logical qubits

  1. Paul V. Klimov,
  2. Andreas Bengtsson,
  3. Chris Quintana,
  4. Alexandre Bourassa,
  5. Sabrina Hong,
  6. Andrew Dunsworth,
  7. Kevin J. Satzinger,
  8. William P. Livingston,
  9. Volodymyr Sivak,
  10. Murphy Y. Niu,
  11. Trond I. Andersen,
  12. Yaxing Zhang,
  13. Desmond Chik,
  14. Zijun Chen,
  15. Charles Neill,
  16. Catherine Erickson,
  17. Alejandro Grajales Dau,
  18. Anthony Megrant,
  19. Pedram Roushan,
  20. Alexander N. Korotkov,
  21. Julian Kelly,
  22. Vadim Smelyanskiy,
  23. Yu Chen,
  24. and Hartmut Neven
A foundational assumption of quantum error correction theory is that quantum gates can be scaled to large processors without exceeding the error-threshold for fault tolerance. Two major
challenges that could become fundamental roadblocks are manufacturing high performance quantum hardware and engineering a control system that can reach its performance limits. The control challenge of scaling quantum gates from small to large processors without degrading performance often maps to non-convex, high-constraint, and time-dependent control optimization over an exponentially expanding configuration space. Here we report on a control optimization strategy that can scalably overcome the complexity of such problems. We demonstrate it by choreographing the frequency trajectories of 68 frequency-tunable superconducting qubits to execute single- and two-qubit gates while mitigating computational errors. When combined with a comprehensive model of physical errors across our processor, the strategy suppresses physical error rates by ∼3.7× compared with the case of no optimization. Furthermore, it is projected to achieve a similar performance advantage on a distance-23 surface code logical qubit with 1057 physical qubits. Our control optimization strategy solves a generic scaling challenge in a way that can be adapted to other quantum algorithms, operations, and computing architectures.

Model-based Optimization of Superconducting Qubit Readout

  1. Andreas Bengtsson,
  2. Alex Opremcak,
  3. Mostafa Khezri,
  4. Daniel Sank,
  5. Alexandre Bourassa,
  6. Kevin J. Satzinger,
  7. Sabrina Hong,
  8. Catherine Erickson,
  9. Brian J. Lester,
  10. Kevin C. Miao,
  11. Alexander N. Korotkov,
  12. Julian Kelly,
  13. Zijun Chen,
  14. and Paul V. Klimov
Measurement is an essential component of quantum algorithms, and for superconducting qubits it is often the most error prone. Here, we demonstrate model-based readout optimization achieving
low measurement errors while avoiding detrimental side-effects. For simultaneous and mid-circuit measurements across 17 qubits, we observe 1.5% error per qubit with a 500ns end-to-end duration and minimal excess reset error from residual resonator photons. We also suppress measurement-induced state transitions achieving a leakage rate limited by natural heating. This technique can scale to hundreds of qubits and be used to enhance the performance of error-correcting codes and near-term applications.

Operation and intrinsic error budget of two-qubit cross-resonance gate

  1. Vinay Tripathi,
  2. Mostafa Khezri,
  3. and Alexander N. Korotkov
We analyze analytically, semi-analytically, and numerically the operation of Cross-Resonance (CR) gate for superconducting qubits (transmons). We find that a relatively simple semi-analytical
method gives accurate results for the CNOT-equivalent gate duration and compensating single-qubit rotations. It also allows us to minimize the CNOT gate duration over the amplitude of the applied microwave drive and find dependence on the detuning between the qubits. However, full numerical simulations are needed to calculate intrinsic fidelity of the CR gate. We decompose numerical infidelity into contributions from various physical mechanisms, thus finding the intrinsic error budget. In particular, at small drive amplitudes the CR gate fidelity is limited by unitary imperfections, while at large amplitudes it is limited by leakage. The gate duration and fidelity are analyzed numerically as functions of the detuning between qubits, their coupling, drive frequency, relative duration of pulse ramps, and microwave crosstalk. Our results show that the CR gate can provide intrinsic infidelity of less than 10−3 when a simple pulse shape is used.

Correlators exceeding one in continuous measurements of superconducting qubits

  1. Juan Atalaya,
  2. Shay Hacohen-Gourgy,
  3. Irfan Siddiqi,
  4. and Alexander N. Korotkov
We consider the effect of phase backaction on the correlator ⟨I(t)I(t+τ)⟩ for the output signal I(t) from continuous measurement of a qubit. We demonstrate that the interplay between
informational and phase backactions in the presence of Rabi oscillations can lead to the correlator becoming larger than 1, even though |⟨I⟩|≤1. The correlators can be calculated using the generalized „collapse recipe“ which we validate using the quantum Bayesian formalism. The recipe can be further generalized to the case of multi-time correlators and arbitrary number of detectors, measuring non-commuting qubit observables. The theory agrees well with experimental results for continuous measurement of a transmon qubit. The experimental correlator exceeds the bound of 1 for a sufficiently large angle between the amplified and informational quadratures, causing the phase backaction. The demonstrated effect can be used to calibrate the quadrature misalignment.

Multi-time correlators in continuous measurement of qubit observables

  1. Juan Atalaya,
  2. Shay Hacohen-Gourgy,
  3. Leigh S. Martin,
  4. Irfan Siddiqi,
  5. and Alexander N. Korotkov
We consider multi-time correlators for output signals from linear detectors, continuously measuring several qubit observables at the same time. Using the quantum Bayesian formalism,
we show that for unital (symmetric) evolution in the absence of phase backaction, an N-time correlator can be expressed as a product of two-time correlators when N is even. For odd N, there is a similar factorization, which also includes a single-time average. Theoretical predictions agree well with experimental results for two detectors, which simultaneously measure non-commuting qubit observables.

Correlators in simultaneous measurement of non-commuting qubit observables

  1. Juan Atalaya,
  2. Shay Hacohen-Gourgy,
  3. Leigh S. Martin,
  4. Irfan Siddiqi,
  5. and Alexander N. Korotkov
We consider the simultaneous and continuous measurement of qubit observables σz and σzcosφ+σxsinφ, focusing on the temporal correlations of the two output signals. Using quantum
Bayesian theory, we derive analytical expressions for the correlators, which we find to be in very good agreement with experimentally measured output signals. We further discuss how the correlators can be applied to parameter estimation, and use them to infer a small residual qubit Hamiltonian arising from calibration inaccuracy in the experimental data.

Quantum Bayesian approach to circuit QED measurement with moderate bandwidth

  1. Alexander N. Korotkov
We consider continuous quantum measurement of a superconducting qubit in the circuit QED setup with a moderate bandwidth of the measurement resonator, i.e., when the „bad cavity“
limit is not applicable. The goal is a simple description of the quantum evolution due to measurement, i.e., the measurement back-action. Extending the quantum Bayesian approach previously developed for the „bad cavity“ regime, we show that the evolution equations remain the same, but now they should be applied to the entangled qubit-resonator state, instead of the qubit state alone. The derivation uses only elementary quantum mechanics and basic properties of coherent states, thus being accessible to non-experts.

Measurement-induced state transitions in a superconducting qubit: Beyond the rotating wave approximation

  1. Daniel Sank,
  2. Zijun Chen,
  3. Mostafa Khezri,
  4. J. Kelly,
  5. R. Barends,
  6. Y. Chen,
  7. A. Fowler,
  8. E. Jeffrey,
  9. E. Lucero,
  10. A. Megrant,
  11. J. Mutus,
  12. M. Neeley,
  13. P. Roushan,
  14. A. Vainsencher,
  15. T. White,
  16. B. Campbell,
  17. B. Chiaro,
  18. A. Dunsworth,
  19. C. Neill,
  20. P. J. J. O'Malley,
  21. C. Quintana,
  22. J. Wenner,
  23. Alexander N. Korotkov,
  24. and John M. Martinis
Many superconducting qubit systems use the dispersive interaction between the qubit and a coupled harmonic resonator to perform quantum state measurement. Previous works have found
that such measurements can induce state transitions in the qubit if the number of photons in the resonator is too high. We investigate these transitions and find that they can push the qubit out of the two-level subspace. Furthermore, these transitions show resonant behavior as a function of photon number. We develop a theory for these observations based on level crossings within the Jaynes-Cummings ladder, with transitions mediated by terms in the Hamiltonian which are typically ignored by the rotating wave approximation. We confirm the theory by measuring the photon occupation of the resonator when transitions occur while varying the detuning between the qubit and resonator.

Measuring a transmon qubit in circuit QED: dressed squeezed states

  1. Mostafa Khezri,
  2. Eric Mlinar,
  3. Justin Dressel,
  4. and Alexander N. Korotkov
Using circuit QED, we consider the measurement of a superconducting transmon qubit via a coupled microwave resonator. For ideally dispersive coupling, ringing up the resonator produces
coherent states with frequencies matched to transmon energy states. Realistic coupling is not ideally dispersive, however, so transmon-resonator energy levels hybridize into joint eigenstate ladders of the Jaynes-Cummings type. Previous work has shown that ringing up the resonator approximately respects this ladder structure to produce a coherent state in the eigenbasis (a dressed coherent state). We numerically investigate the validity of this coherent state approximation to find two primary deviations. First, resonator ring-up leaks small stray populations into eigenstate ladders corresponding to different transmon states. Second, within an eigenstate ladder the transmon nonlinearity shears the coherent state as it evolves. We then show that the next natural approximation for this sheared state in the eigenbasis is a dressed squeezed state, and derive simple evolution equations for such states using a hybrid phase-Fock-space description.

Qubit measurement error from coupling with a detuned neighbor in circuit QED

  1. Mostafa Khezri,
  2. Justin Dressel,
  3. and Alexander N. Korotkov
In modern circuit QED architectures, superconducting transmon qubits are measured via the state-dependent phase and amplitude shift of a microwave field leaking from a coupled resonator.
Determining this shift requires integrating the field quadratures for a nonzero duration, which can permit unwanted concurrent evolution. Here we investigate such dynamical degradation of the measurement fidelity caused by a detuned neighboring qubit. We find that in realistic parameter regimes, where the qubit ensemble-dephasing rate is slower than the qubit-qubit detuning, the joint qubit-qubit eigenstates are better discriminated by measurement than the bare states. Furthermore, we show that when the resonator leaks much more slowly than the qubit-qubit detuning, the measurement tracks the joint eigenstates nearly adiabatically. However, the measurement process also causes rare quantum jumps between the eigenstates. The rate of these jumps becomes significant if the resonator decay is comparable to or faster than the qubit-qubit detuning, thus significantly degrading the measurement fidelity in a manner reminiscent of energy relaxation processes.