Measurements of a quantum bulk acoustic resonator using a superconducting qubit

  1. M.-H. Chou,
  2. É. Dumur,
  3. Y. P. Zhong,
  4. G. A. Peairs,
  5. A. Bienfait,
  6. H.-S. Chang,
  7. C. R. Conner,
  8. J. Grebel,
  9. R. G. Povey,
  10. K. J. Satzinger,
  11. and A. N. Cleland
Phonon modes at microwave frequencies can be cooled to their quantum ground state using conventional cryogenic refrigeration, providing a convenient way to study and manipulate quantum
states at the single phonon level. Phonons are of particular interest because mechanical deformations can mediate interactions with a wide range of different quantum systems, including solid-state defects, superconducting qubits, as well as optical photons when using optomechanically-active constructs. Phonons thus hold promise for quantum-focused applications as diverse as sensing, information processing, and communication. Here, we describe a piezoelectric quantum bulk acoustic resonator (QBAR) with a 4.88 GHz resonant frequency that at cryogenic temperatures displays large electromechanical coupling strength combined with a high intrinsic mechanical quality factor Qi≈4.3×104. Using a recently-developed flip-chip technique, we couple this QBAR resonator to a superconducting qubit on a separate die and demonstrate quantum control of the mechanics in the coupled system. This approach promises a facile and flexible experimental approach to quantum acoustics and hybrid quantum systems.

Phonon-mediated quantum state transfer and remote qubit entanglement

  1. A. Bienfait,
  2. K. J. Satzinger,
  3. Y. P. Zhong,
  4. H.-S. Chang,
  5. M.-H. Chou,
  6. C. R. Conner,
  7. E. Dumur,
  8. J. Grebel,
  9. G. A. Peairs,
  10. R. G. Povey,
  11. and A. N. Cleland
Phonons, and in particular surface acoustic wave phonons, have been proposed as a means to coherently couple distant solid-state quantum systems. Recent experiments have shown that
superconducting qubits can control and detect individual phonons in a resonant structure, enabling the coherent generation and measurement of complex stationary phonon states. Here, we report the deterministic emission and capture of itinerant surface acoustic wave phonons, enabling the quantum entanglement of two superconducting qubits. Using a 2 mm-long acoustic quantum communication channel, equivalent to a 500 ns delay line, we demonstrate the emission and re-capture of a phonon by one qubit; quantum state transfer between two qubits with a 67\% efficiency; and, by partial transfer of a phonon between two qubits, generation of an entangled Bell pair with a fidelity of FB=84±1 %

Violating Bell’s inequality with remotely-connected superconducting qubits

  1. Y. P. Zhong,
  2. H.-S. Chang,
  3. K. J. Satzinger,
  4. M.-H. Chou,
  5. A. Bienfait,
  6. C. R. Conner,
  7. É. Dumur,
  8. J. Grebel,
  9. G. A. Peairs,
  10. R. G. Povey,
  11. D.I. Schuster,
  12. and A. N. Cleland
Quantum communication relies on the efficient generation of entanglement between remote quantum nodes, due to entanglement’s key role in achieving and verifying secure communications.
Remote entanglement has been realized using a number of different probabilistic schemes, but deterministic remote entanglement has only recently been demonstrated, using a variety of superconducting circuit approaches. However, the deterministic violation of a Bell inequality, a strong measure of quantum correlation, has not to date been demonstrated in a superconducting quantum communication architecture, in part because achieving sufficiently strong correlation requires fast and accurate control of the emission and capture of the entangling photons. Here we present a simple and scalable architecture for achieving this benchmark result in a superconducting system.

State preservation by repetitive error detection in a superconducting quantum circuit

  1. J. Kelly,
  2. R. Barends,
  3. A. G. Fowler,
  4. A. Megrant,
  5. E. Jeffrey,
  6. T. C. White,
  7. D. Sank,
  8. J. Y. Mutus,
  9. B. Campbell,
  10. Yu Chen,
  11. Z. Chen,
  12. B. Chiaro,
  13. A. Dunsworth,
  14. I.-C. Hoi,
  15. C. Neill,
  16. P. J. J. O'Malley,
  17. C. Quintana,
  18. P. Roushan,
  19. A. Vainsencher,
  20. J. Wenner,
  21. A. N. Cleland,
  22. and John M. Martinis
Quantum computing becomes viable when a quantum state can be preserved from environmentally-induced error. If quantum bits (qubits) are sufficiently reliable, errors are sparse and
quantum error correction (QEC) is capable of identifying and correcting them. Adding more qubits improves the preservation by guaranteeing increasingly larger clusters of errors will not cause logical failure – a key requirement for large-scale systems. Using QEC to extend the qubit lifetime remains one of the outstanding experimental challenges in quantum computing. Here, we report the protection of classical states from environmental bit-flip errors and demonstrate the suppression of these errors with increasing system size. We use a linear array of nine qubits, which is a natural precursor of the two-dimensional surface code QEC scheme, and track errors as they occur by repeatedly performing projective quantum non-demolition (QND) parity measurements. Relative to a single physical qubit, we reduce the failure rate in retrieving an input state by a factor of 2.7 for five qubits and a factor of 8.5 for nine qubits after eight cycles. Additionally, we tomographically verify preservation of the non-classical Greenberger-Horne-Zeilinger (GHZ) state. The successful suppression of environmentally-induced errors strongly motivates further research into the many exciting challenges associated with building a large-scale superconducting quantum computer.

Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits

  1. C. M. Quintana,
  2. A. Megrant,
  3. Z. Chen,
  4. A. Dunsworth,
  5. B. Chiaro,
  6. R. Barends,
  7. B. Campbell,
  8. Yu Chen,
  9. I.-C. Hoi,
  10. E. Jeffrey,
  11. J. Kelly,
  12. J. Y. Mutus,
  13. P. J. J. O'Malley,
  14. C. Neill,
  15. P. Roushan,
  16. D. Sank,
  17. A. Vainsencher,
  18. J. Wenner,
  19. T. C. White,
  20. A. N. Cleland,
  21. and John M. Martinis
Many superconducting qubits are highly sensitive to dielectric loss, making the fabrication of coherent quantum circuits challenging. To elucidate this issue, we characterize the interfaces
and surfaces of superconducting coplanar waveguide resonators and study the associated microwave loss. We show that contamination induced by traditional qubit lift-off processing is particularly detrimental to quality factors without proper substrate cleaning, while roughness plays at most a small role. Aggressive surface treatment is shown to damage the crystalline substrate and degrade resonator quality. We also introduce methods to characterize and remove ultra-thin resist residue, providing a way to quantify and minimize remnant sources of loss on device surfaces.

Observation of topological transitions in interacting quantum circuits

  1. P. Roushan,
  2. C. Neill,
  3. Yu Chen,
  4. M. Kolodrubetz,
  5. C. Quintana,
  6. N. Leung,
  7. M. Fang,
  8. R. Barends,
  9. B. Campbell,
  10. Z. Chen,
  11. B. Chiaro,
  12. A. Dunsworth,
  13. E. Jeffrey,
  14. J. Kelly,
  15. A. Megrant,
  16. J. Mutus,
  17. P. O'Malley,
  18. D. Sank,
  19. A. Vainsencher,
  20. J. Wenner,
  21. T. White,
  22. A. Polkovnikov,
  23. A. N. Cleland,
  24. and J.M. Martinis
The discovery of topological phases in condensed matter systems has changed the modern conception of phases of matter. The global nature of topological ordering makes these phases robust
and hence promising for applications. However, the non-locality of this ordering makes direct experimental studies an outstanding challenge, even in the simplest model topological systems, and interactions among the constituent particles adds to this challenge. Here we demonstrate a novel dynamical method to explore topological phases in both interacting and non-interacting systems, by employing the exquisite control afforded by state-of-the-art superconducting quantum circuits. We utilize this method to experimentally explore the well-known Haldane model of topological phase transitions by directly measuring the topological invariants of the system. We construct the topological phase diagram of this model and visualize the microscopic evolution of states across the phase transition, tasks whose experimental realizations have remained elusive. Furthermore, we developed a new qubit architecture that allows simultaneous control over every term in a two-qubit Hamiltonian, with which we extend our studies to an interacting Hamiltonian and discover the emergence of an interaction-induced topological phase. Our implementation, involving the measurement of both global and local textures of quantum systems, is close to the original idea of quantum simulation as envisioned by R. Feynman, where a controllable quantum system is used to investigate otherwise inaccessible quantum phenomena. This approach demonstrates the potential of superconducting qubits for quantum simulation and establishes a powerful platform for the study of topological phases in quantum systems.

Simulating weak localization using superconducting quantum circuits

  1. Yu Chen,
  2. P. Roushan,
  3. D. Sank,
  4. C. Neill,
  5. Erik Lucero,
  6. Matteo Mariantoni,
  7. R. Barends,
  8. B. Chiaro,
  9. J. Kelly,
  10. A. Megrant,
  11. J. Y. Mutus,
  12. P. J. J. O'Malley,
  13. A. Vainsencher,
  14. J. Wenner,
  15. T. C. White,
  16. Yi Yin,
  17. A. N. Cleland,
  18. and John M. Martinis
Understanding complex quantum matter presents a central challenge in condensed matter physics. The difficulty lies in the exponential scaling of the Hilbert space with the system size,
making solutions intractable for both analytical and conventional numerical methods. As originally envisioned by Richard Feynman, this class of problems can be tackled using controllable quantum simulators. Despite many efforts, building an quantum emulator capable of solving generic quantum problems remains an outstanding challenge, as this involves controlling a large number of quantum elements. Here, employing a multi-element superconducting quantum circuit and manipulating a single microwave photon, we demonstrate that we can simulate the weak localization phenomenon observed in mesoscopic systems. By engineering the control sequence in our emulator circuit, we are also able to reproduce the well-known temperature dependence of weak localization. Furthermore, we can use our circuit to continuously tune the level of disorder, a parameter that is not readily accessible in mesoscopic systems. By demonstrating a high level of control and complexity, our experiment shows the potential for superconducting quantum circuits to realize scalable quantum simulators.

Optimal quantum control using randomized benchmarking

  1. J. Kelly,
  2. R. Barends,
  3. B. Campbell,
  4. Y. Chen,
  5. Z. Chen,
  6. B. Chiaro,
  7. A. Dunsworth,
  8. A. G. Fowler,
  9. I.-C. Hoi,
  10. E. Jeffrey,
  11. A. Megrant,
  12. J. Mutus,
  13. C. Neill,
  14. P. J. J. O'Malley,
  15. C. Quintana,
  16. P. Roushan,
  17. D. Sank,
  18. A. Vainsencher,
  19. J. Wenner,
  20. T. C. White,
  21. A. N. Cleland,
  22. and John M. Martinis
We present a method for optimizing quantum control in experimental systems, using a subset of randomized benchmarking measurements to rapidly infer error. This is demonstrated to improve
single- and two-qubit gates, minimize gate bleedthrough, where a gate mechanism can cause errors on subsequent gates, and identify control crosstalk in superconducting qubits. This method is able to correct parameters to where control errors no longer dominate, and is suitable for automated and closed-loop optimization of experimental systems

Qubit architecture with high coherence and fast tunable coupling

  1. Yu Chen,
  2. C. Neill,
  3. P. Roushan,
  4. N. Leung,
  5. M. Fang,
  6. R. Barends,
  7. J. Kelly,
  8. B. Campbell,
  9. Z. Chen,
  10. B. Chiaro,
  11. A. Dunsworth,
  12. E. Jeffrey,
  13. A. Megrant,
  14. J. Y. Mutus,
  15. P. J. J. O'Malley,
  16. C. M. Quintana,
  17. D. Sank,
  18. A. Vainsencher,
  19. J. Wenner,
  20. T. C. White,
  21. Michael R. Geller,
  22. A. N. Cleland,
  23. and John M. Martinis
We introduce a superconducting qubit architecture that combines high-coherence qubits and tunable qubit-qubit coupling. With the ability to set the coupling to zero, we demonstrate
that this architecture is protected from the frequency crowding problems that arise from fixed coupling. More importantly, the coupling can be tuned dynamically with nanosecond resolution, making this architecture a versatile platform with applications ranging from quantum logic gates to quantum simulation. We illustrate the advantages of dynamic coupling by implementing a novel adiabatic controlled-Z gate, at a speed approaching that of single-qubit gates. Integrating coherence and scalable control, our „gmon“ architecture is a promising path towards large-scale quantum computation and simulation.

Logic gates at the surface code threshold: Superconducting qubits poised for fault-tolerant quantum computing

  1. R. Barends,
  2. J. Kelly,
  3. A. Megrant,
  4. A. Veitia,
  5. D. Sank,
  6. E. Jeffrey,
  7. T. C. White,
  8. J. Mutus,
  9. A. G. Fowler,
  10. B. Campbell,
  11. Y. Chen,
  12. Z. Chen,
  13. B. Chiaro,
  14. A. Dunsworth,
  15. C. Neill,
  16. P. O'Malley,
  17. P. Roushan,
  18. A. Vainsencher,
  19. J. Wenner,
  20. A. N. Korotkov,
  21. A. N. Cleland,
  22. and John M. Martinis
A quantum computer can solve hard problems – such as prime factoring, database searching, and quantum simulation – at the cost of needing to protect fragile quantum states
from error. Quantum error correction provides this protection, by distributing a logical state among many physical qubits via quantum entanglement. Superconductivity is an appealing platform, as it allows for constructing large quantum circuits, and is compatible with microfabrication. For superconducting qubits the surface code is a natural choice for error correction, as it uses only nearest-neighbour coupling and rapidly-cycled entangling gates. The gate fidelity requirements are modest: The per-step fidelity threshold is only about 99%. Here, we demonstrate a universal set of logic gates in a superconducting multi-qubit processor, achieving an average single-qubit gate fidelity of 99.92% and a two-qubit gate fidelity up to 99.4%. This places Josephson quantum computing at the fault-tolerant threshold for surface code error correction. Our quantum processor is a first step towards the surface code, using five qubits arranged in a linear array with nearest-neighbour coupling. As a further demonstration, we construct a five-qubit Greenberger-Horne-Zeilinger (GHZ) state using the complete circuit and full set of gates. The results demonstrate that Josephson quantum computing is a high-fidelity technology, with a clear path to scaling up to large-scale, fault-tolerant quantum circuits.